Description

Built my dream rig. I'll mostly be using it for gaming and photography.

The monitor is wonderful. I debated between a high refresh 3 monitor 1080p surround or the 3440 x 1440p monitor. Since photography is one of my main uses, I decided the IPS panel would be best for color.

The water cooling is a custom loop with two 240 radiators run in parallel. One rad on top and one in the front.

The H440 is a nice case but the thermals are a problem. When running BF4 in full ultra at 3440 x 1440, it will heat up alot. I have to pull the front cover off in order to get better air flow to keep it cool. This is a little bit of a disappointment since I really wanted a quite computer, hence the water cooling. I might upgrade the fans to see if I can keep the front panel on during gaming.

A few quick benchmarks with a moderate OC - 3dmark firestrike is hitting 18K , CineBench R15 is hitting 176 fps. Yes - I am happy.

EDIT: Per request, added picture of reservoir taken from the back. It shows how tight everything is and how I needed the top bay for a HDD.

Also like to say the 2 SSDs are in a Raid 0 and are amazing fast. Just a few seconds to boot windows.

Comments

  • 64 months ago
  • 18 points

The cat is just basking in the magnificent light of this machine...

  • 64 months ago
  • 4 points

Great Build! I'm sure this runs all games very fast and really well. If you don't mind me asking, what do you for a living because it seems like this build was very costly.

  • 64 months ago
  • 16 points

Thanks, I'm not rich, I'm just older and at a point in life that I have a little extra disposable income. (engineer btw)

  • 64 months ago
  • 4 points

Now I know what I want to be when I grow up :P

  • 64 months ago
  • 3 points

Nice! What field of engineering are you in?

  • 64 months ago
  • 3 points

Civil

  • 63 months ago
  • 2 points

Nice!

  • 63 months ago
  • 2 points

I am interested in Chemical but Civil is also pretty cool. Congrats, dude.

  • 58 months ago
  • 2 points

Wow, My dad is a Civil Engineer, My dad says it is a very good job! Hope you enjoy it :)

  • 64 months ago
  • 1 point

Thanks. I was just wondering and I have seen people spend way more on a build but it seems like you did really way.

  • 64 months ago
  • 1 point

How old are you? My life plan is to become an engineer and build myself a super system just like you

  • 64 months ago
  • 6 points

LOL - how old am I? My first upgrade was to solder additional memory into my Atari 400 computer. Went from 16K to 64K.

  • 64 months ago
  • 5 points

I am typing in a Pentium .533 Ghz laptop so, the srtuggle is real. You sir are my insipiration

  • 62 months ago
  • 2 points

Ha! I had an Atari 400 too with the tape drive that used cassette tapes. Took 45 minutes to load certain programs and often times it wouldn't load but you wouldn't know until it was "done".

Wow, I feel old now...

  • 60 months ago
  • 1 point

hounestly do you think I should get this case as I would like to run 4k at high-ultra settings and wouldn't want my case to overheat from this case do you think I should consider buying this case and how hot does it get inside the case

[comment deleted]
  • 64 months ago
  • 4 points

BogDog, you have a nice build there. The cat is awesome!

What would you estimate the cooling performance to be? Subjectively, how would you rate the noise from the radiator fans?

  • 64 months ago
  • 1 point

With the front and top panel off, the two 240s handle all the heat on any game with my moderate OC. Full load gaming I am hitting 50-60 degs on the GPUs, 60-70 deg on the CPU. I could tweek the performance more and probably it would still run cool.

With the panels on, it slowly starts creeping up to 85-100 degs on the CPU. I'm hoping a set of better fans on the front rad will move more air through.

The case is very quite with the panels on and sorta noisy with them off.

  • 64 months ago
  • 2 points

Thanks BogDog.

  • 64 months ago
  • 2 points

Too me, something is definitely wrong here. On such a mild overclock. you should be getting very low temps even on full load....

  • 64 months ago
  • 1 point

The case has notoriously narrow intake vents, which leads to starved radiators.

  • 64 months ago
  • 1 point

hmmm I see. I actually really liked that case :(.

  • 64 months ago
  • 2 points

Ok, there's no way you should be hitting 85-100 degrees with the panels on and with that kind of overclock. I run a 3570K on an air cooler with a higher overclock and I don't see temps even near 70 degrees. You should check your CPU voltages and make sure they are not too high, because, to me, that seems to be the culprit behind your really high temps.

  • 64 months ago
  • 1 point

the best 120mm radiator fan noctua nf-f12 and if you dont care about noise you can get their industrial black ones (with very high static pressure needed for rads)

  • 64 months ago
  • 4 points

You should really check out other cases!

Careful when running minesweeper, though.

Great build, congrats on making your dream come true!

  • 63 months ago
  • 1 point

If you do decide to check out other cases, the Corsair Air 540 is really great for dual 240mm radiators.

  • 64 months ago
  • 2 points

Gotta love a build that has a cat. :)

  • 64 months ago
  • 2 points

Wow helluva build

  • 64 months ago
  • 2 points

Get two or three noctua industrial ppc fans at 3000 rpm. Those will cool off that case with no problem. If noise is a concern go with the PWM one or the 2000 rpm one.

  • 64 months ago
  • 2 points

This is beautiful.

  • 64 months ago
  • 2 points

AAHHH, I thought it was gonna be a mineral oil build :( Still cool build though.

  • 64 months ago
  • 2 points

Is that an HDR shot in the second to last picture? It's a pretty awesome picture! Nice build

  • 64 months ago
  • 1 point

I originally thought I would have to but got away with a single shot. I shot the picture in RAW and was able to massage it in LightRoom. Highlights cranked down; shadows and whites cranked up; touch of clarity. I got plenty of noise due to the dark shadows under the table but figured PCpartspicker images are so small that a little noise reduction would be all I need.

  • 64 months ago
  • 2 points

What kind of frames do you get with those Ti's? I'm about to SLI my 780's and get this exact monitor. I'm hoping they won't struggle too much. Thanks.

  • 64 months ago
  • 1 point

You'll be fine with SLI 780s with this monitor.

  • 64 months ago
  • 2 points

That's what I wanted to hear. I was considering the 2560x1080 version, but I think I'd rather save up the extra $300-400 and get this beast.

  • 64 months ago
  • 1 point

I do like the build. I wanted to pop in because of your temps. 2 x 240 Rad should be fine for your setup as far as heat dissipation (I am sitting next to the 270 Proton Pump/Res XSPC Combo with 10 compression fittings, 10ft of primo chill 3/8 " ID 1/2" OD tubing, EK Supremacy Plexi CPU Block, just missing the 360 V3 Xspc Rad) You have 3 components to 4 x 120 rad (120rad per component) But my opinion would be your fins per inch compared to your fan speeds. Are you running a 20 fpi vs 1100 rpm fans?? I know you said It was in the "Kit" but I was just wondering. I planned on just using my 360 V3 rad for my processor untill I get a 780 Ti EVGA block so I can get a custom water block for it. Still then with my 360 I would only have 2 components being cooled. Let me know. Love the Red build. I am building right now in a 750D Corsair and my 270 Proton is 1' Tall!! I am a little nervous.

  • 64 months ago
  • 2 points

How about a mouse pad for that table?

  • 64 months ago
  • 1 point

Its on its way

  • 64 months ago
  • 2 points

can you show the locations of your pump and reservoirs? i tried watercooling in an h440 and it was too much of a hassle for me

  • 64 months ago
  • 1 point

I added an image showing the location of the pump/res combo

  • 64 months ago
  • 2 points

thank you very much! you definitely did it justice. great job :)

  • 64 months ago
  • 2 points

Just have to sleeve those cables then it will be perfect =)

  • 64 months ago
  • 2 points

REally nice build you got there. I am not an expert but you might consider changing the orientation of the fan on the back to make it an intake fan in order to feed the fans pushing air on your top rad if you haven't done that already.

  • 64 months ago
  • 1 point

Thanks for the advice, I might play around with it.

  • 64 months ago
  • 2 points

You win.

  • 64 months ago
  • 2 points

Oh my...god...

  • 64 months ago
  • 2 points

+1 simply cus fav color.

  • 59 months ago
  • 2 points

+1 for the cat

  • 55 months ago
  • 2 points

Of course you should be happy man!! One quick question, I'm in the process of building one of my own and I was wondering where did you buy the office chair and table?

  • 64 months ago
  • 1 point

Is there any reason why you didn't use 360mm radiators? Were there clearance issues? Btw lovely build, especially that monitor. +1

  • 64 months ago
  • 1 point

I could have fitted 360s (at least one, maybe two) but I needed the top bay for my HDD. I wasn't sure how I was going to fit the reservoir/pump inside and didn't know if I could use the bottom drive mount.

  • 64 months ago
  • 1 point

Never upvote any case without an optical

  • 64 months ago
  • 1 point

The build is awesome and I love your choice of monitor. I wish I could get that one. As for case being hot...that's why I prefer cases that have open fronts that don't block the fans in any way. Corsair 500R might be better choice if you swap out.

  • 64 months ago
  • 1 point

Nice build man :D

  • 64 months ago
  • 1 point

Really nice looking build man. I'm debating on whether or not I should save up and build a water cooled PC, and you may have just helped me make up my mind.

  • 64 months ago
  • 1 point

Are the led accents on the Maximus VII Hero noticeable with other components and led accents placed elsewhere in your build? Just want to know for my build, like noticeable through the window, and if the light is getting drowned by other accents? Thanks, and absolutely gorgeous build man, im in shock :)

  • 64 months ago
  • 2 points

The board does have some led accents in different spots. The most striking is the heat sink on the z97 chip set, but having two graphics cards does obscure it a bit.

  • 63 months ago
  • 1 point

Sweet! i was hoping they were noticeable! The build quality on that board is good i presume? I can read all the reviews i want, but its nice to hear that coming from someone that owns it! And the H440, you have some criticisms on it, but what kind of a run down can you give me of it, pros and cons wise?, thanks so much :)

  • 63 months ago
  • 1 point

I can't tell, did you mount the pump/res to the front rad? Did you have to drill holes in the mounting plate?

  • 63 months ago
  • 1 point

I mounted the the res to the front drive bay panel using the supplied risers. If you look at picture #4, you can see the 4 silver screws. Yes, I did have to drill.

  • 63 months ago
  • 1 point

Because the title said "underwater" I thought it was going to be a $4,000 oil cooled P.C but it is cool anyway :D

  • 63 months ago
  • 1 point

I plan on using this case with a Sapphire r9 290 (non-x)and it says this: http://prntscr.com/4fny3a

can you remove the 1 or few of the hard drive bays to make enough room for the card to fit in? Thanks!

  • 63 months ago
  • 1 point

Yes - all of the drive bays are removable. I took all but one out. Most likely you'll only need to remove one.

  • 63 months ago
  • 1 point

BogDog, how did you get all the lights to be red? I'm curious because in other images posted by other users the lights in the case are white and the XSPC blocks are blue. I like how it is all red and am wondering how I would go about doing the same thing. Thanks! Love the build man!

  • 63 months ago
  • 1 point

The XSPC lights for the cpu, gpu and reservoir where all blue leds. I just bought red leds and swapped them out.

  • 63 months ago
  • 1 point

Ok cool! Was it a relatively easy process? I've never done that before. Thanks for answering my questions :)

  • 63 months ago
  • 1 point

That's the IKEA Galant desk right?

  • 63 months ago
  • 1 point

Yes - one of the last ones. They are replacing the Galant series with something new.

  • 63 months ago
  • 1 point

They have a few at my local ikea, is yours 63in long or 47? I don't think I can wait for them to replace these because I need a new desk BAD.

  • 63 months ago
  • 1 point

63

  • 63 months ago
  • 1 point

LIQUID NITRO!!!!! :D

  • 63 months ago
  • 1 point

Good build sir, maybe your are getting hot temp because in your custom loop u made the exit of ''hot'' water that came out of the CPU go straight into the GPU's whichi might be adding up the temperature instead of cooling down... I might be wrong must probably but i think it makes sense..

  • 62 months ago
  • 1 point

Is there an optical drive already installed?

  • 62 months ago
  • 1 point

no optical drives.

  • 62 months ago
  • 1 point

waaaaaaaaaaaaaaaaaaaaaaaaaaaat ;-;

  • 62 months ago
  • 1 point

clap...clap...clap

  • 61 months ago
  • 1 point

you should buy an amp for those headphones

  • 61 months ago
  • 1 point

Hmmm... good build, but I think it needs more red. JK, this is a freakin' epic build.

  • 60 months ago
  • 1 point

DAMN

THAT CHAIR IS HUGE!

  • 60 months ago
  • 1 point

WOW

THAT CHAIR IS HUGE

  • 60 months ago
  • 1 point

+1

That's all I'm gonna say...

  • 58 months ago
  • 1 point

something is wrong with your temps... i am running 4.9ghz on my 4790k and temps are at 86 Celsius under heavy load the fans in my case are all stock. look to make sure you are not feeding you cpu to much juice, also make sure that there is nothing restricting the airflow in our case if things get in the way they can easily cause cooling problems, one more thing... make sure that all your front case fans are pulling in and your rear and top fans are pushing out.

  • 57 months ago
  • 1 point

Dat is one beautiful system

  • 57 months ago
  • 1 point

That monitor....... Sooooo nice.

  • 57 months ago
  • 1 point

Awesome table where can I purchase same one?

  • 56 months ago
  • 1 point

Nice build and is that an xspc water cooling kit?

  • 56 months ago
  • 1 point

If you want to keep everything cool I personally would have thrown it all into an ATX full tower, more space and better airflow. That's what I do for all the gaming builds I put together if the client can afford it. Plus the cable management on a full tower is amazing.

  • 56 months ago
  • 1 point

How did you get the LED on the waterblock red? The same kit today only comes in blue...

  • 55 months ago
  • 1 point

How is the Barracuda? A lot of people despite the Barracuda and Seagate hard drives in general.

  • 47 months ago
  • 1 point

I love the cat. My cats come when i'm asleep just to sleep on my chair.

  • 64 months ago
  • -2 points

Why wouldn't you just do a 4k monitor???

  • 64 months ago
  • 5 points

Because 21:9 ratio displays are amazing. They're much more comfortable for me than triple monitors and they're perfect for gaming (if you're a maniac for fov) and web browsing. I'd buy one myself, but they're pretty expensive, even for 2560x1080.

  • 64 months ago
  • 3 points

I personally like these monitors more aswell.

  • 64 months ago
  • -2 points

but does the price really justify it for you?

  • 64 months ago
  • 2 points

It was mostly about the widescreen feel when gaming. I was looking for more peripheral vision.

  • 64 months ago
  • 0 points

It is a 4K monitor!!!!

  • 64 months ago
  • 1 point

No it's not..

Not even the "4k" monitors out now are. They're all UHD.

  • 63 months ago
  • 1 point

: |

4K Monitors have been out now for MONTHS

  • 63 months ago
  • 2 points

Did you even read my comment? The monitor on this build is not even the consumer friendly definition of 4k, which is 3840x2160. It's 3440x1440.

If you look up the definition of 4k, the standard resolution is 4096x2160. All of the "4k" monitors out now are 3840x2160. Which is why I said "4k" monitors out now are not even 4k.

  • 59 months ago
  • 1 point

Nice build and thanks for the resolution lesson.

[comment deleted]
[comment deleted]
[comment deleted]
[comment deleted]
[comment deleted]
[comment deleted by staff]
  • 63 months ago
  • 1 point

LOL - I absolutely hate every chair I get at first. Over time, I get to like them. This chair is still kinda new to me, but its starting to grow on me.

[comment deleted by staff]
[comment deleted]