Description

This is just a checkpoint in my build. Later i plan on upgrading my case add a second card then water-cooling everything. So i got a PSU that would be able to power what ever I wanted to do in the future.

Comments

  • 82 months ago
  • 2 points

Lookin good!I wouldn't run my cpu that hot though.

  • 82 months ago
  • 1 point

Yeah, it is getting up there. I think Intel recommends cutting it off at 72. At a 4.8ghz OC i would say the h100 is doing its job pretty well.

  • 82 months ago
  • 4 points

A stock cooler couldn't do much better at stock speeds.

  • 82 months ago
  • 2 points

clean

  • 82 months ago
  • 1 point

I always have to ask this question: Why not the H100i?

  • 82 months ago
  • 1 point

I built this PC before the H100i was out :/

  • 82 months ago
  • 1 point

Oh. :(

  • 82 months ago
  • 1 point

Another build with an overkill 1000W+ PSU. -.-

Unless there's a description or reason for it, I does not like!

  • 82 months ago
  • 4 points

This is just a checkpoint in my build. Later i plan on upgrading my case add a second card then water-cooling everything. So i got a PSU that would be able to power what ever I wanted to do in the future.

  • 82 months ago
  • 1 point

That's better. Put it in the description so you can avoid more of that, lol.

  • 82 months ago
  • 1 point

Most systems don't need much more than 600 or so but you know just in case.

  • 82 months ago
  • 1 point

BIG BANG... haha MSI

  • 82 months ago
  • 1 point

I know right? Considering half their boards blow up when you overclock lol

  • 82 months ago
  • 1 point

Though this maybe true for their cheap budget line of boards they do put this board through a 24 hour Prime 95 overclock stress test with an overclocked i7 as part of Quality Assurance on each Mpower board.

  • 82 months ago
  • 1 point

Yes, I'm fully aware this is one of their good boards. Their good boards I have absolutely no problem with, in fact I would even go as far to recommend them. It's their low end boards that I strongly advise people not to get, or if they absolutely must get one, then they better not even think about overclocking on them. But there is one thing I'm curious about, how highly overclocked of an i7 is it? That actually can make a difference with the vrms, but I'm pretty confident this specific board could take any overclock.

  • 82 months ago
  • 1 point

needs more pentium

  • 82 months ago
  • 1 point

You have tow Incompatibilities Issues in your build: Intel Core i7-3770K 3.5GHz Quad-Core Processor and Corsair Vengeance 16GB (4 x 4GB) DDR3-2400 Memory are not compatible, Change it to Corsair CMZ16GX3M4A2400C10 for perfect performance. Corsair Vengeance 16GB (4 x 4GB) DDR3-2400 Memory operating voltage of 1.65V exceeds Intel Ivy Bridge CPU recommended maximum of 1.5V.

Best Regards.

  • 82 months ago
  • 1 point

How are you liking that Msi 7950? I heard there are some issues with the factory applied thermal paste and that it has coil wine.

  • 82 months ago
  • 1 point

I got my last summer so it may be more of a current issue. My temps are good ever for my high OC, i was lucky to get one with a 7970 PCB as well my GPU got a ASIC rating of 91.1%. I play all game maxed so i'm happy. :)

  • 82 months ago
  • 1 point

Sounds great however since they're not selling them with 7970 pcbs anymore i think im going to go with the gigabyte 7950 personally.

  • 80 months ago
  • 0 points

Where are all your cables?

[comment deleted]