Description

Solidworks, Inventor and Autocad

Comments

  • 23 months ago
  • 22 points

"Oops, I lost my wallet. Let me get my second one."

  • 23 months ago
  • 6 points

i bet that can run minecraft at like 40 fps kek :3

  • 12 months ago
  • 2 points

Considering it’s running dual quadro p5000...the Xeon will absolute bottle neck the crap out of it in game So though minecraft will run faster than 40 it won’t pass 100

  • 22 months ago
  • 4 points

but can it run minecraft at 4k 60fps

  • 9 months ago
  • 1 point

It probably could run Minecraft at 5K at over 1000 fps

  • 7 months ago
  • 1 point

Nope....read my comment above kek Too damn lazy to write it again

  • 7 months ago
  • 1 point

Considering I can run it at 4K max with an i5-8250u 1.6Ghz and a gtx 1050 2gb at over 120fps, a desktop processor might be able to break at least 200.

  • 5 months ago
  • 1 point

I have i7 7700hq GTX 1050 it hits 80 fps max 1080p

  • 4 months ago
  • -1 points

No such thing as 5k, but there is 8k and up to 16k, though anything past 4k is quite unecessary since very few graphics cards support it

  • 4 months ago
  • 1 point

Actually, there is. 5k is just a mathematical representation of vertical pixel count, like 4K. 4K is 2160p and 5k is 2880p. Just like 2k is 1080p (half of 4K), 2.5k (1440p) is half of 5k.

If you want even more proof, look up 5k monitors and look at the iMac pro.

  • 23 months ago
  • 3 points

No O.C. No Tweaking. All my 3D Stuff looks great. Moving in 3D environment is smooth. Happy with my build so far.

  • 23 months ago
  • 8 points

I can't say I'm surprised.

+1

  • 23 months ago
  • 1 point

Have you had any trouble with Autodesk? I imagine that your configuration computer isn't certified by them.

  • 23 months ago
  • 0 points

Nope AutoCAD , Inventor and Solidworks work fine. 3D runs smooth even big assemblies.

  • 22 months ago
  • 1 point

o

  • 20 months ago
  • 1 point

hi , great build ...

how Dell monitor works for you so far ??! ... considering to purchase one for my photography rig , can't decide between Asus PA329Q or Dell UP2715K ...

[comment deleted by staff]
  • 17 months ago
  • 1 point

I too have a Dual Xeon but E5-2684 v4 28 cores / 56 threads combined and a GTX 980SC EVGA gpu. Like you I don’t play games but use it for 3D Architectural design. Chief Architect X9 and Lumion 8 are my main platforms with a little Photoshop for USGS TOPO map adjustments.

Questions: 1) assuming you have a comparison, how do the quadro cards compare to GTX cards? Perhaps your colleagues have some data. 2) based on #1) would you go Quadro again?

I ask because the two programs I use recommend GTX over Quadro. Chief is actually moving away from heavy core use with their new PBR engine Vs. their Ray Tracing engine loves all those cores. Lumion too favors the GTX 1080ti GPU and no XEON’s. Both programs favor High GPU memory and Clock speed in both CPU and GPU. I have no idea how the Quadro works with Chief and Lumion.

Thanks for your time and Beautiful System you have.

  • 17 months ago
  • 1 point

Hi Can't help you there it's just me, myself and I (work at home). All I can tell you this is working great for me. If your system works I wouldn't change it.

  • 15 months ago
  • 1 point

i get this build but why two 8k monitors? there is literally no need in manufacturing.

  • 13 months ago
  • 1 point

I like working on two monitors. Use one side Autocad the other side inventor. Just the way I like to work. The monitors are 27" 5K I switched them out with two 32" 4K

  • 12 months ago
  • 1 point

5K Monitors. Graphics are beautiful and smooth. Inventor on one, AutoCAD on other Monitor. I like working with two Monitors.

  • 14 months ago
  • 1 point

“ If u h@s MoR dEN oNe vIde0 €arD whY IS noT u§E 4 gA¥mInG!¡!¡” , half the comments hear are like that .

  • 13 months ago
  • 1 point

I like working on two monitors. Use one side Autocad the other side inventor. Just the way I like to work. The monitors are 27" 5K I switched them out with two 32" 4K. Like I said before I do not game on my Work Stations. I Play on PS4 and Xbox One (I own 2 of each).

  • 14 months ago
  • 1 point

wheres all the rgb

  • 12 months ago
  • 1 point

RGB is popular in the gaming industry...this is the workstation side of thing, you'd probably see full RGB servers before you see RGB workstations

  • 13 months ago
  • 1 point

Hey nice build but still wondering i have been using a quadro p4000 for solidworks and autocad but it still feels a bit slow does the second gpu help with preformance would you say its worth it? currently using a 7700k and a p4000?

  • 12 months ago
  • 1 point

My current CAD setup uses two p4000s and SolidWorks runs great, even with fairly large assemblies. I also do a lot of work with Creo and it runs well. Don't know about AutoCAD.

  • 12 months ago
  • 1 point

You should be fine. Don't think the little bump is worth the money. I did it mainly for the two 5K Monitors.

  • 12 months ago
  • 1 point

Are those memory ECC registered?

  • 12 months ago
  • 1 point

yes they are

  • 12 months ago
  • 1 point

Do you see any difference in your that machines? Or do they only work in the back ground correcting errors...as their names implies...Error correction code..

  • 8 months ago
  • 1 point

On Linux you can see reports of corrected and uncorrected errors using the edac-util command. I believe Windows similarly displays them in some event log.

  • 22 months ago
  • 0 points

Can it run crysis at 30 fps on low?

  • 22 months ago
  • 2 points

No Gaming on this PC. Sorry

  • 19 months ago
  • 0 points

It doesn't look very nice though.

  • 17 months ago
  • 1 point

Its a Workstation (tool) sitting in a closet.

  • 23 months ago
  • -1 points

Nice build! Is that for a server? Because there are so many cores and a server GPU. But I would wait for AMD's Threadripper if I were you. It is rumored to cost $849 and it has 16 cores and 32 threads. And its clock speed is 3.1.

  • 23 months ago
  • 1 point

Nope its my everyday Work Station

  • 22 months ago
  • -1 points

Why is one of your GPUs more exspesev than the other? also i wish icould aforad thisXD

  • 22 months ago
  • 1 point

Your mouse is more $$$$$$ than my CPU!!!!!!

  • 22 months ago
  • 1 point

jesus dude what kinda cpu you got that is less than $70??

  • 22 months ago
  • 0 points

The AMD - FX-4350 4.2GHz Quad-Core Processor it's $58.95 on Amazon

  • 22 months ago
  • 1 point

ok lol aleast its a good one

[comment deleted]
  • 22 months ago
  • 1 point

The one that cost less replaced another that did not work, so they did not charge me for shipping.

  • 22 months ago
  • 0 points

O

  • 20 months ago
  • -1 points

All this, and you do not game on it?

  • 17 months ago
  • 3 points

Nope but I make a lot of money with it. It's a Workstation. I do have 1 PS4, 1 PS4 Pro, 1 XBos One S and One Xbox One X Scorpio Edition. Like to keep Work and Gaming separate.

  • 15 months ago
  • 2 points

You have one of every modern console...

  • 14 months ago
  • 1 point

Yah , I get having an both an Xbox 1 and a PS4, but , why every version of each ?

  • 10 months ago
  • 3 points

got 11 grandkids

  • 22 months ago
  • -2 points

what do you use both of those GPU's for if not gaming?

  • 16 months ago
  • 1 point

For GPU accelerated workloads. some programs can use cuda cores (cores inside an nVidia GPU [Stream Processors for amd] to do calculations instead of CPU cores). those aplications also scale almost perfectly with multiple GPUs (Reason super computers have hundrets to thousands of them) also Cryptocurrency mining is the same in a way. (it uses GPU cores too)

[comment deleted]
[comment deleted by staff]
  • 18 months ago
  • 3 points

you're*

[comment deleted by staff]
  • 16 months ago
  • 3 points

an*

[comment deleted]