Description

First time building a water build system. Took my time with it was in no rush and I feel cane out looking great.

Comments

  • 7 months ago
  • 3 points

Must be nice have 3 TB of M.2 Samsung SSD lol. +1

  • 7 months ago
  • 1 point

Its great, but running close to 50% use on both so i just ordered another 1TB.

  • 7 months ago
  • 2 points

Holy Smokes, How'd you run up that much already?

  • 7 months ago
  • 3 points

I'm a huge sucker for steam sales.

  • 7 months ago
  • 3 points

oh fair enough.

  • 7 months ago
  • 2 points

SSB Vegeta gives you brownie points

  • 4 months ago
  • 2 points

How was it fitting your mobo in this case? Did it block and grommet holes?

  • 7 months ago
  • 1 point

Looks good man! +1 I want to make a water custom loop but i'm terrified lol

  • 7 months ago
  • 2 points

I was in the same boat but i had to try it out to see if its as simple as they say and being that it was my first time doing I took my time to plan it out and make sure i got all matching parts that are compatible. Took about one month to get everything together and about 4 days to do all the bends and test it out. Though what i would recommend is start with soft tubing as andyp297 but when you do switch to hard tubing save the soft tubing. reason i say this is i had one problem were i had to drain the loop 4 times because I had to get the CPU block replaced due to RGB not working and then the GPU RMA due to similar issue. If I had used soft tube to test everything then once I know its ok I can just drain it the one time and then put on the hard tubes. Hope this helps in future builds.

  • 7 months ago
  • 1 point

Ditto! But I'm really tempted to try on my next one.

  • 7 months ago
  • 4 points

Best thing is to start with a soft tubing loop that will help build confidence to go hardline.

  • 7 months ago
  • 1 point

Thanks sir!

  • 7 months ago
  • 1 point

Nice build! What are the temps of the cpu?

  • 7 months ago
  • 2 points

on idle it sits about 35-38c on full load 55-59c.

  • 7 months ago
  • 1 point

Wow, perfection

  • 7 months ago
  • 2 points

Thank you

  • 7 months ago
  • 1 point

Awesome build, love the custom loop!

  • 7 months ago
  • 1 point

Thank you

  • 7 months ago
  • 1 point

This is absolutely crazy!

  • 7 months ago
  • 1 point

Diggin' those tubes man, have not seen that before. +1

  • 7 months ago
  • 1 point

This is defiantly going to be featured

  • 7 months ago
  • 1 point

Sooooo clean

  • 7 months ago
  • 1 point

thank you!

  • 7 months ago
  • 1 point

custom loop, eh?

I too like to live dangerously.

  • 7 months ago
  • 1 point

DANGERZONE!!!

  • 7 months ago
  • 1 point

i do not trust that is your first WC ever, bending tube isn't hard but this result is almost pro well very nice build love the smoked tube

  • 7 months ago
  • 1 point

Thanks, only reason it looks so nice is barbecue i wasted sooooo many tubes to get it as perfect as i could to the point that some tubes i just didn't want to bend and just added 90 degree fittings to cheat my way through it. i might still buy one more tube to straighten the one that leads from GPU to water block.

  • 7 months ago
  • 1 point

you could go same as the cpu to rad and then straight to Wb but might be block with top tubes, anyway i'm sure it will look neat :)

  • 7 months ago
  • 1 point

Liquid cooling your GPU? What temps are you getting on it?

  • 7 months ago
  • 1 point

same as my CPU temps on idle it sits about 35-38c on full load 55-59c

  • 7 months ago
  • 1 point

ooh nice

  • 7 months ago
  • 1 point

Now this is just a piece of art. Absolutely stunning. +1

  • 7 months ago
  • 1 point

thanks

  • 7 months ago
  • 1 point

Does it matter which is in or out on the card?

  • 7 months ago
  • 1 point

On this card i dont believe so because there is fins on both sides but i just have the habit of in left and out right.

  • 7 months ago
  • 1 point

I'm really loving the build! Just one question for you :) Does the card clear if it is mounted as normal? I am going for exactly the same card and case and I just wanted to know.

  • 7 months ago
  • 1 point

no it will not clear sadly. it sticks out about an inch.

  • 7 months ago
  • 1 point

Damnnn that's unfortunate :< I just love this case and card combo so much. Which vertical bracket did you use?

  • 7 months ago
  • 1 point

Currently it’s the lian li 011 dynamic verticals bracket

  • 6 months ago
  • 1 point

Does the vertical bracket and riser card come with the case?

  • 6 months ago
  • 1 point

no i had to buy that separately.

  • 7 months ago
  • 1 point

Are all your RGB’s synced up?

  • 7 months ago
  • 1 point

Yes

  • 7 months ago
  • 1 point

This is the first build of me seeing the Aorus Extreme and O11 Dynamic in a build. I'm assuming you kept most of the components stock?

  • 7 months ago
  • 1 point

Yes didn’t need to mod anything though I do have a spare 011 Dynamic I plan to mod to make it left sided.

  • 6 months ago
  • 1 point

I am looking to do a build in this case. Any complaints with it? I am not going to be doing a water build. I have heard that this case doesn't get good air flow do you think it still be ok for me? nice build though. +1

  • 6 months ago
  • 1 point

From my experience on this case I have done only air cooled , AIO cooled and Water cooler, as for airflow I feel it get amazing air flow as long as you are no going full negative or positive. At max you can put 9 fans in the case, this is not including fans that would attach to an air cooled cpu coolers, but only problem i have with this case is the it is a bit narrow so a lot of the bulky GPUs or CPU cooler will not fit. I was unable to fit 1080 ti FTW3, 2080 ti FTW3, and the 2080ti Xtreme edition GPUs. All this GPUs need about only 1 inch to 1 1/2 more clearance and it would be perfect.

  • 6 months ago
  • 1 point

Ok thanks for the information!

  • 4 months ago
  • 1 point

Any special paint you had to use? Thinking about doing the same thing. Love the build!

  • 2 months ago
  • 1 point

Does the reservoir block the use of the side fans? or restrict you from placing side fan and radiator?

  • 2 days ago
  • 1 point

Looks beautiful.

I'm curious of your thoughts on fitting that e-atx board in this case with that water distribution block. I'm about to run something similar and I'm sort of dreading how tight I think it might be.