PCPartPicker

  • Log In
  • Register

Build

First Ryzen Build (Bessie)

by tbjprojects

Description

P3 case is pretty awesome i must say. i had to replace the 2 fans on the bottom and top of cabinet with be quite due to noise other than that the build all seems to be running fine. iv played a few games and the PC it self has passed all so far.

i build the whole thing from scratch including the entertainment unit. the PC cabinet has 4 120mm be quite fans. 2 in the base for intake and 2 in the top for out take. iv had to integrate wiring for power and reset with silver buttons located on the back of the cabinets top. The LED strip lights are controlled by a touch sensor on left hand side of the actual top above the computer there is a wiring and power plug compartment housed in the back with lift up lid.

A special shout out to Bennyc911 for helping me on the build.

Comments Sorted by:

TacoNinja 2 Builds 13 points 8 months ago

+1 for fooling me into thinking you built it straight into the TV shelf! That is a clean build, and love the well deserved center of attention!

TacoNinja 2 Builds 5 points 8 months ago

Correct me if I'm wrong, did you mount the case without the glass and cover the shelf section with a completely different glass panel?

tbjprojects submitter 1 Build 9 points 8 months ago

Yup that is correct.

Aelar_Nailo 9 points 7 months ago

Beautiful. Just beautiful. Shut up and take my... Wait, I don't have any money. Shut up and take my upvote!

CarnivorousHam 1 Build 1 point 8 months ago

It fooled me too! Very cool setup there.

IncognitoGamer123 11 points 8 months ago

Cars! +1 Because I love the build and what you were watching.

LatiosGaming 7 points 7 months ago

kachow

ssjg5rlly 3 points 7 months ago

kacherr

[comment deleted by staff]
gsaiz85 3 Builds 5 points 8 months ago

WOW! Amazing, I love how you made the Core P3 seem like it was part of that furniture. +1

Wolfemane 7 Builds 5 points 8 months ago

Very cool use of both the cabinet and case!!! +1

Eltech 19 Builds 5 points 8 months ago

Now that's very cool to see a computer implanted into an entertainment furniture. You've blown me away. And there goes my one...

tbjprojects submitter 1 Build 4 points 8 months ago

Thanks sounds like iv sold it already. Cant wait to try it again but maybe some thing different.

Eltech 19 Builds 2 points 7 months ago

Congrats for a well deserved feature spotlight. May your next project be a pleasant experience again!

tbjprojects submitter 1 Build 2 points 7 months ago

thanks

nbrigdan 2 points 8 months ago

That's fantastic.

skyrise 1 Build 2 points 8 months ago

B.E.A.U.T.I.F.U.L!

Chewy9141 2 points 8 months ago

Yea this will be a featured soon

Zerizum 2 Builds 2 points 8 months ago

feature!

ajaxguy 2 points 8 months ago

would use 200+ mm fans on the cabinet because they're quiet and have tons of airflow at low rpm's

look into the noctua 200mm fan

+feature

tbjprojects submitter 1 Build 2 points 8 months ago

thanks for the advice iv sold this now so IL try that on my next build

Bennyc911 1 point 8 months ago

Wow, this is impressive, I'm getting one made at the moment, these custom PC cabinets are next level...

Jo_Jolion 1 point 8 months ago

Hey tbjprojects, i have a question on your led strip in your case Since i have similar pc build recently,only got Hall of Frame led on gpu fan. So, what kind of led strip that you use for the build? It is not too much fancy "rgb" but bring peaceful atmosphere for the case

tbjprojects submitter 1 Build 2 points 8 months ago

hi Jo_Jolion im a furniture builder so i got the LED form a building supplier please see link below for the LED i used and the touch switch. i also put a link how the touch switch works.

http://www.furnwaredorset.com.au/cabinet-lighting/Flexyled-CR_16

https://youtu.be/peW56x-CtTo

Jo_Jolion 1 point 8 months ago

thanks for your reply

chavezgarrett7 3 Builds 1 point 8 months ago

The way the pc is implemented with the desk is actually super cool man. I really like that clean look.

Obamas.mama 3 Builds 1 point 8 months ago

Holy balls that's the coolest idea ever... +4946262950629304827

tbjprojects submitter 1 Build 1 point 8 months ago

Hi thanks il try get some more up in the next day or so

Obamas.mama 3 Builds 1 point 8 months ago

More pics please!!

dominicc_02 1 Build 1 point 8 months ago

Cool build man! Love the way the case look like a part of the cabinet <3

Arminecraft 1 Build 1 point 8 months ago

Dude I freaking love your setup, the concept of having the motherboard as part of the wardrobe is sooo cool <3 Good job, I hope you get featured!

Arminecraft 1 Build 1 point 7 months ago

Ayyy you got featured as I said! :D

Gentleman00 2 Builds 1 point 8 months ago

At first I thought there are boots inside the PC, but that's your reflection. xD Nice build.

maverickvii 2 Builds 1 point 8 months ago

beautiful work

JSJ22 1 point 8 months ago

I know im repeating what others have said, but they way the case blends in so well is genius. Wish you had before pics though, because this is worth copying. Obviously a +1

SavantPCs 7 Builds 1 point 8 months ago

That's cool it looks like the cabinet was made for it!

tbjprojects submitter 1 Build 2 points 8 months ago

yup i'm a furniture builder buy day so i made the whole thing. iv actually sold this now so IL get to build another one try some thing different.

customgtp 19 Builds 1 point 8 months ago

That's pretty creative!! +1

Caminon 1 Build 1 point 8 months ago

That's a really cool idea! Might try it myself should I build an HTPC.

ssaulsbu 1 Build 1 point 8 months ago

Clever build! Really well done.

dak000 2 Builds 1 point 8 months ago

+1 from me, this is a sexy build for sure. ADD BETTER DESCRIPTION AND PRICES!!!! --If you do then I call featured.

tbjprojects submitter 1 Build 1 point 8 months ago

thanks for the advice IL try update a better description and pricing in the next 24h. i didn't actually think it was going to get that much attention.

Kshitijgoel15 1 Build 1 point 8 months ago

Can you please describe as to how you assembled this.

A8_Tony 1 point 8 months ago

Great build :)

aGoat 7 Builds 1 point 8 months ago

Love it! That would be such a pain in the *** to keep clean in my house... would have to clean it weekly xD +1 for in the furniture!

IncognitoGamer123 1 point 7 months ago

More pictures!

LonghornAlamo2040 1 point 7 months ago

Great mod! I would never do that though.

AryanPtl 1 Build 1 point 7 months ago

This is super cool and creative. Mind of you tell me where you got the 2 silver power and reset buttons from? ive been wanting to this king of project for a while now.

tbjprojects submitter 1 Build 1 point 7 months ago

jay car electrical

Gooberdad 8 Builds 1 point 7 months ago

Very cool custom build.

Thumbs up.

AvgFeminist 1 point 7 months ago

Omg why have you done this to me.... Thermaltake makes a white p3 case D: D: D: D:

dragoon20005 4 Builds 1 point 7 months ago

Bessie the tar layer machine from Cars 1

jushui 1 Build 1 point 7 months ago

I'm guessing that baby gate is to keep something out, not in right?

Sweet setup! +1!

tbjprojects submitter 1 Build 1 point 7 months ago

keeping the young fella in

Yahtadi 1 point 7 months ago

You sir are fantastic!

CustomPCBuildsUK 1 point 7 months ago

Gorgeous integration.

kuiama2015 1 point 7 months ago

Nice Job. Love the way it looks and how functional the stand is and yet shows off the computer without out being over bearing. If I might ask. How much did you spend on materials for the cabinet?

killingjoke26 1 point 7 months ago

This is awesome and creative. Thanks for sharing and inspiring. I have a living room setup and am looking for ways to implement my PC with the home entertainment center.

DubiousDeeds 1 Build 1 point 7 months ago

Very cool, totally digging it.

Tomasn 1 point 7 months ago

Very nice clean build. Good job.

However I would find the LED lighting very disturbing under the LCD when watching movies.

It's the kind of build I'd like my friend to have, rather than myself for everyday use :)

westwandaguys 1 point 7 months ago

Nice!

A custom loop would look amazing

kevin105008 1 point 7 months ago

Nice shop you have there, and a Ryzen 5 feature! +1

Design1stcode2nd 5 Builds 1 point 7 months ago

Sweet build, cabinet too.

arturs_stepa 1 Build 1 point 7 months ago

That is one, awesome built right there :D I guess you are future proofed with that psu ;) +1

Velocitron2000 1 point 7 months ago

That is so cool, awesome job.

hypergalaxy8 1 Build 1 point 7 months ago

Three year old me would have gone crazy over this (because of Cars)! +1

Radox-0 5 Builds 1 point 7 months ago

Damm, that is pretty spectacular. amazing and creative work here. Easy +1

NobleSavage 1 point 7 months ago

This concept would have worked much better with matte black cabinets and smart glass (opaque matte black to completely transparent) covering the rigs cavity. This way you could hide the build or showcase it depending upon the situation or your mood.

Dual control of the RGB's and the glass panels opacity would enable more control over how much it stands out, as it is now the PC distracts far too much from the screen, personally when playing I'd want the rig to be barely visible.

Your cabinet idea is a great one, but the concept could be taken much further forwards. Next time think about that.

tbjprojects submitter 1 Build 1 point 7 months ago

Thanks for the advice iv sold this now so i get to have another go probably try some thing different again. smart glass wouldn't work with stand off brackets tho it creates shadows in the glass. ill use the touch switch for the LED light again as it can be controlled (on,off and dim) though google home.

iwalkwithedead 15 Builds 1 point 7 months ago

Awesome!

McDoogie 2 Builds 1 point 7 months ago

Love this build. Super clean, incredible job man!

KYOKUN240 2 Builds 1 point 7 months ago

bro this is Dope can I buy it

tbjprojects submitter 1 Build 1 point 7 months ago

I've sold this one but I can make you another one to buy. If you live in Sydney

WshiSima1 1 point 7 months ago

Nice !

Pcbuilder3der 1 Build 1 point 7 months ago

Do u by chance have blueprints on how to build it or a material list?

tbjprojects submitter 1 Build 1 point 7 months ago

yup i do for both

Voipes 1 point 7 months ago

Clean af

Morbidxd 1 Build 1 point 5 months ago

Dude, how much would you charge to build an entertainment center for me. Definitely getting an upvote from me.

Zeromus725 1 point 3 months ago

300th upvote. :)

ReddyXD 1 point 3 months ago

+1 Awesome idea fits in seamlessly I plan on doing something like this, just wondering how thick the backboard of the cabinet was in order for the mount to attach?

Riotz 1 point 2 months ago

I like how you decided to watch the cars movie. +1

robopengyfez 1 point 1 month ago

Great build. Good amount of RAM good graphics card and CPU. Overall good build

tpapi2 0 points 7 months ago

Looks great! I'm new to this, just made a part list. Looking for opinions. Any feedback is welcome please. https://pcpartpicker.com/list/XZWZgL

WallabeAttack 1 point 7 months ago

Looks good, Im going to recommend a couple things though. Your Ram is decently priced but you could do better Team Dark has the lowest priced 16gb red/black Ram on the market at the moment. Also your cpu i love ryzen but your cpu is to good for that gpu its fine to use but if your strictly gaming go with ryzen 3 120o or ryzen 5 1400 but if its anything other than only gaming go with ryzen 5 1600 instead of 1600X. Lastly add an ssd with all the small corners cut you can definitely buy a ssd. SSD's just make chrome and games load faster and feel snappier.