PCPartPicker

  • Log In
  • Register

Build

I AM TITANIUM

by atomicus

601
204 Comments

Part List View full price breakdown

Details

Date Published

Nov. 2, 2016

CPU Clock Rate

3.4GHz

GPU Core Clock Rate

1.61GHz

GPU Effective Memory Clock Rate

10.0GHz

Description

Here is my just completed build.

I have wrapped the InWin 303 case in brushed 3M-1080 Titanium vinyl... a painstaking task which has taken many, many hours. Anyone thinking of doing this, I would advise against it... I shudder to think how long I spent on the vents on the side panel! I also wrapped the backplate of the 1080 GPU in the same vinyl and applied an MSI dragon vinyl decal, just to tie it in with the motherboard.

I made the cable extensions myself from Teleios sleeving for 24-pin ATX, 8-pin PCI-E and 6+4-pin EPS (with clear cable combs from Shakmods).

Overall this was a fun, albeit very time consuming build and I'm very happy with how it turned out. Temps are excellent, idles at 20 for CPU, and isn't getting over 50 during a heavy gaming session, same applies to the GPU. Runs very quiet, although I do hear the bottom ML120 fans even when at low speed, so in time I would change these for something quieter, just so it is a totally quiet system. The top fans and pump are virtually inaudible.

Hardline tubing is not such an easy thing to get perfect, but I'm happy with my runs and the Mayhems Clear Blue UV looks good, although it's hard to photograph. The UV effect does fade slightly though, so anyone thinking of using it should be aware of that.

:)

I do plan on selling this (simply to fund my PC building addiction), so if anyone is interested feel free to drop me a message. Or alternatively if you need help or even advice on a new your build yourself, get in touch. I am based in the south UK.

Comments Sorted by:

Mason54 16 Builds 23 points 12 months ago
Tpgeee 2 Builds 2 points 12 months ago
Mason54 16 Builds 1 point 12 months ago

Actually no suprisingly i diddnt know that was a thing.

[comment deleted by staff]
rhali8 2 Builds 6 points 12 months ago
Tpgeee 2 Builds 2 points 12 months ago

HAHA! 134 points! :)

StarBlazer457 2 points 12 months ago

Now it's 137

Tpgeee 2 Builds 2 points 12 months ago

jipster don't take no ****.

Mason54 16 Builds 2 points 12 months ago

Well i actually diddnt know that was a thing so thanks fir sharing. I got the idea because as i was viewing it my brother asked

Is it actually titaniun

To which i reaponded that, realized it was funny and then posted it

[comment deleted by staff]
Mason54 16 Builds 3 points 12 months ago

Is ok. Mason is never serious either unless it involves Cables or Fans facing the wrong way

cbalmaceda 2 Builds 8 points 12 months ago

Absolutely STUNNING

One of the cleanest and most beautiful PCs I have seen. I love the blue/purple (especially purple since it's my favorite color).

AION-MC EKWB 18 Builds 7 points 12 months ago

This is glorious... That's all

rosswalker 1 Build 6 points 12 months ago

This is beyond beautiful, +1.

butch10x 1 Build 2 points 12 months ago

Awesome build mate! Love the custom rigid tubing! Did you use a bending kit?

atomicus submitter 2 Builds 3 points 12 months ago

I bent most by hand and eye, although I has to use very specific measurements to get the second bend on the top Rad to CPU tube as that had to be mm accurate... took a few attempts as too much tension was pushing it up or down, so it didn't run parallel at the top... I'm a perfectionist haha! :)

butch10x 1 Build 1 point 12 months ago

very nice work indeed!

Arcticyclone 4 Builds 2 points 12 months ago

Wow! Great Build! I also have a UV custom loop. I hope those UV led strips last for you. I bought those originally and they got extremely dim after a month. I would suggest Cable Mod Wide-beam UV strips if those do end up dying on you. Again, fantastic build, well done. +1

atomicus submitter 2 Builds 1 point 12 months ago

Thanks. I've actually been asked to beta test some new RGB+UV LED strips from Cable Mod, so they should be coming soon... will be interested to see how they compare. I'm not crazy about the Darkside ones given they are rigid and with thickly sleeved ends... it makes placement a bit more tricky and I had to use double sided tape to get them to stay put.

PHENOM59 2 points 12 months ago

This thing is immaculate... and worth more than my car haha.

Great work.

Lyrix 2 points 12 months ago

THIS WILL GET FEATURED? WAIT.... IS IT ALREADY? IM WRITING IN CAPS..... ITS WORTH IT! 1+!!!!

Lyrix 0 points 12 months ago

It is! wow! great job!

thekasafist 1 Build 2 points 12 months ago

Simple straight forward and not overdone or over the top but powerful for the right person and that is you! +1 Fantastic job!

Radox-0 3 Builds 1 point 12 months ago

Absolutely stunning work. Everything from the Vinyl wrap, custom cables to the custom loop. Been waiting to see how a custom loop looks in this and its fantastic. Easy +1

You had a crack at Ocing that chip?

atomicus submitter 2 Builds 1 point 12 months ago

I have not tried that yet, but I am interested to see what it will do. :)

Meithen 2 Builds 1 point 12 months ago

The color theme is amazing, very nice build!

Upgrade 8 Builds 1 point 12 months ago

This is amazing!

montiago 1 Build 1 point 12 months ago

Purple/Blue yessssss! Good job!

TheBlackPython 1 Build 1 point 12 months ago

this is amazing!

jadesoncutter 1 point 12 months ago

How did you get your coolant to glow? I had someone ask, and we both were interested

cbalmaceda 2 Builds 2 points 12 months ago

It is an ultraviolet solution I'm fairly certain.

jadesoncutter 1 point 12 months ago

Alright. Thanks!

atomicus submitter 2 Builds 2 points 12 months ago

Yes it's UV, Mayhems Clear Blue UV (totally clear without the UV lights). I have used Darkside UV LED strips.

Partha 1 point 12 months ago

+1.Amazing build.

jadesoncutter 1 point 12 months ago

Congrats on the feature!

FHD32423 1 point 12 months ago

At last,an Inwin 303 build that looks like what I dreamt when I first saw this case,what this case deserves.

+1

And the new Riing fans look even better.The increased number of fan blades makes it look like a led AF120 lol.

atomicus submitter 2 Builds 2 points 12 months ago

Thanks, and yes I totally agree with you on the Riing fans, and them being software controlled really helps. The original Riings just had the hardware controller. They're super quiet also.

FHD32423 1 point 12 months ago

Also can I add your build as the 100th entry in The PCPP CPU/GPU Survey.That would be a really great help :)

atomicus submitter 2 Builds 1 point 12 months ago

Sure, thanks, that would be absolutely fine. :)

Mafugma 1 point 6 months ago

The stock green Riing 140s that came with my Thermaltake were quieter than a Noctua I bought. That Noctua is no joke either. Just breath near it and it will spin for days. It was useless on my MSI Titanium anyways. For some reason a flagship mobo only supports one pwm, the CPU fan, and my Kraken took that one.

atomicus submitter 2 Builds 1 point 6 months ago

Yeah the Riings are decent fans. Thermaltake seem to get a bad rep by many for their fans, but price/performance is very decent, and they do look good... something few have ever said about Noctuas lol ;)! I have a few EK Vardar F4-120ER (Extended Range) on a 360 rad in another build at the moment, plus two Silent Wings 3 140s on a 240 rad... very good fans also, the EK's in particular push a lot of air at low speed.

Lots of motherboards seem to be cheaping out with true PWM headers these days, many only having one, it's very annoying!

Mafugma 1 point 6 months ago

My Noctua actually looks good. It's not that ugly brown. Noctua makes a line of stripped down models. They're gray, and their performance is the same (I think), just absolutely nothing comes with the fan. I don't remember it even having screws. I stole one side of bumpers off a Thermaltake fan. Half the price though.

atomicus submitter 2 Builds 1 point 6 months ago

Yes those are case fans, not optimised for radiators and they don't perform as well as they brown models annoyingly, but they're still great fans. The black industrial ones are more powerful if you want max air flow (although they're not as quiet), and you can get the rubber corner colour replacements for those, so that definitely helps.

[comment deleted]
SilverWolf149 1 point 12 months ago

Are you considering doing a giveaway anytime soon? 10/10 Would buy(or just take it if you don't want it). +1 for such a great build and it looks amazing wrapped with the vinyl.

atomicus submitter 2 Builds 1 point 12 months ago

A giveaway lol? I will not being giving this away I'm afraid. I do plan on selling it though, simply so I can keep building. I sunk everything in to this, I'm not rich, but I love building PC's! :)

SilverWolf149 1 point 12 months ago

I'll give you the contents of my pocket then. Hmmm... let's see. Some lint, a bent paperclip for severing someone's artery or picking cufflinks, whichever situation you're in, a piece of raw potato, a cyanide capsule(should probably get rid of that), and a work in progress letter on to trump on why the constitution is important.

Wanna trade?

atomicus submitter 2 Builds 2 points 12 months ago

Unfortunately I was looking for an unbent paperclip, so I'll have to decline. I also only deal in whole potatoes.

SilverWolf149 1 point 12 months ago

I could rebend the paperclip and graft the potato piece back on, but I respect your decision.

Mind leaving your address so I can send a "package" your way?

jk though. Great build though and wish you the best of luck with it.

Z3DM4N 5 Builds 1 point 12 months ago

well this is a build i will dream of tonight

GamingX10 1 point 12 months ago

It's... it's... FREAKING AWESOME!!!!! This is one of the sleekest computers I have ever seen.

Risingnapkin 1 Build 1 point 12 months ago

Atomicus, this is a fantastic build. Truly beautiful work. I have a question though; what methodology did you use to get your Dominator Platinums to glow red? I believe stock Dominator Platinums have white light effects. Granted, I bought my last round of Dominator Platinums about 5 months ago, and it's possible there's a new revision out with RGB. The reason I ask is because I had a friend attempt to laser cut some custom light bars out of red acrylic to replace the ones Corsair sends out, but the light didn't pass through as well or as brightly. Again, great build and congrats on the feature.

atomicus submitter 2 Builds 1 point 12 months ago

I honestly have no idea about the Dominator being red... they should be white, and that's what I was expecting, so I was pleasantly surprised when I switched the thing on and they were red!

Risingnapkin 1 Build 1 point 12 months ago

Ah, you're lucky, and I'm jealous. I did some digging, and it appears that they are RGB, but Corsair made the annoying choice that in order to connect the RAM to your motherboard and change the color using Corsair Link, you have to use a "Dominator Airflow Platinum LED Fan". The 5-pin connector on the RAM connects to the aftermarket RAM cooler, which connects to a USB 2.0 header. Basically, Corsair wants us to spend more money; especially on something that is unnecessary nowadays. RAM voltage and thermal output is so low, they don't need their own fan cooling, since any case with good airflow will remove the heat plenty. Anyways, thanks for the quick reply.

ProfessorPancake 1 point 12 months ago

Incredible build, looks phenomenal with the UV lighting!

Great work with the vinyl and it looks even better with it.

SalFlu 1 point 12 months ago

Idk how you managed to do that, but is f****** beautifull. Before I +1, I gotta get my jaw of the floor...

gedairo 1 point 12 months ago

Awesome! but i'm having hard time understanding its loop. Pump > radiator > gpu > cpu > radiator > reservoir?

atomicus submitter 2 Builds 2 points 12 months ago

It's Res/Pump > Rad > GPU > CPU > Rad > Res/Pump

Specter2100 1 Build 1 point 12 months ago

Really nice work. I love how you pulled all of it together. Your custom loop also looks very efficient courtesy of its size.

LeMooncake 1 point 12 months ago

Oh my god I love it.

atomicus submitter 2 Builds 1 point 12 months ago

Thanks everyone for all the kind comments and the feature! :D

OrangeRedBull 1 Build 1 point 12 months ago

sexy

istouche 1 point 12 months ago

Man, that's pretty..

nulldotzero 1 point 12 months ago

Great build, one of my all-time favorites here! Maybe you hear the bottom fans because they are horizontal?

atomicus submitter 2 Builds 1 point 12 months ago

This is possible yes.

IBuildCompooters 1 point 12 months ago

+1 No words can define beauty but this computer can! :)

Also I was the hundredth person to +1 it.

Killjoy2357 3 Builds 1 point 12 months ago

Thank you for the great pictures! I am working on a build in this case with 2x360mm radiators and had no idea how to run the tubes. Looks awesome!

Volkov 1 Build 1 point 12 months ago

Aaaaah soooo clean. Very nice build. How are the ML120's? I have ML140 Blue LEDs to put in my new build. Are they as silent as I have heard they are?

atomicus submitter 2 Builds 2 points 12 months ago

No they aren't silent... in fact more noise than I was expecting actually, even at low speed. Not sure why. Not loud by any means, but I can hear them above everything else which is virtually silent.

SirMints 2 Builds 1 point 12 months ago

Hellllooooo Beautiful!!! +1

mb67 5 Builds 1 point 12 months ago

This is beyond amazing looking! Your attention to detail is inspiring! :-)

Songster 1 Build 1 point 12 months ago

I am for one, am in love now:)

+1

HelloPeyton 1 Build 1 point 12 months ago

Just that LED color combo is too good to not get a like

rhali8 2 Builds 1 point 12 months ago

Uh... if you shoot this down will it fall? :P

+1

Blacksm1le 1 Build 1 point 12 months ago

Beautiful construction and great part (for water cooling you should separate the CPU to the graphics card for better results for the temperature)

Gooberdad 7 Builds 1 point 12 months ago

Wow. That is beautiful.

Thanks for posting.

Thunbs up.

Thefan630 1 Build 1 point 12 months ago

Wow, this is a truly clean, pretty build. My personal fave so far

philphaser 12 Builds 1 point 12 months ago

Iz you a wizard?! °_o

littletoad 1 point 12 months ago

I'm a peasant! :(

MannyPCs 1 point 12 months ago

Oh wow :)

This is what you call....

Featured

well done Sir.

KingOfHeartsAlive 1 Build 1 point 12 months ago

This is the kind of thing that I would do for fun if I had money to throw away. my build is good enough as it is. it could use a gpu update, but other than that, I could last for a long time with my computer. it was only $1300 and I am still broke from it. I want to be clear, this is the most beautiful build I have seen in a long long time, I am just ranting because I am jealous. thank you for ******* making me cry.

P.S. **** MSI

FACUNDO 13 Builds 1 point 12 months ago

I can't resist +1ing this build. It's completely INCREDIBLE.

MasonMac 1 point 12 months ago

I Am Groot

Razorwing02 1 Build 1 point 12 months ago

I see stuff like this that makes me glance over at my Hyper 212 and sigh. + all the 1s. Excellent work.

Vreaker12 3 Builds 1 point 12 months ago

OMG, breathtaking. Worth the feature. +1

WirelessCables 1 Build 1 point 12 months ago

I think I shall add this to my 'Favorite builds' list... +1.

Edit :

+3.14159265358979323846264...

MiraMinx 1 point 12 months ago

This build is just fantastic, I really envy how well you used and paired the different colors involved.

Very well done my man, you deserve a lot of praise for this work.

colinreay 3 Builds 1 point 12 months ago

Absolutely stunning man! Great job all around, that vinyl definitely paid off!

Potatoman01 1 point 12 months ago

That looks Spectacular. I am giving you my +1 not only due to the quality of the build, but also because of the time and effort and time again you put into this. I can only imagine how long that custom vinyl wrapping took. Grate job mate :)

darkclow 1 Build 1 point 12 months ago

Amazing picture and color combo

dimm0k 1 point 12 months ago

wow, this is pure awesome! makes me feel like going the water cooler way =(

Ericson33 1 Build 1 point 12 months ago

WOW! such a clean build!

WillieNelson16 1 point 12 months ago

Very nice!

KyleFinnegan 1 point 12 months ago

Clean, Cool, Modern, and Unique

DoctorWock 1 point 12 months ago

That's awesome. You should consider posting this to /r/outrun.

atomicus submitter 2 Builds 2 points 12 months ago

Thanks. Funny you say that, because I think my colour scheme has been subconsciously influenced by that kind of stuff, as I'm a real fan of it. And actually, I've been contemplating an 80's themed build lately, I have some really cool ideas I'd like to try... I need to sell this one first though because I can barely afford to eat at present haha!

DoctorWock 1 point 12 months ago

haha, I admire that kind of commitment. Hope to see more from you eventually.

Digitalcosmos 1 point 12 months ago

How mutch you selling it for?

atomicus submitter 2 Builds 1 point 12 months ago

I am open to all sensible offers... you can see how much it's cost me, or thereabouts, and the effort, care and attention to detail that's gone in. That said, I know it's not easy to sell systems like this, and so many people want something for nothing these days. It's the perfect system for me, I love it, but I also love building... I'm like a traveller who has reached a land of great riches. I want to stay but the journey ahead is pulling me, I must go on...

Digitalcosmos 1 point 12 months ago

I understand but you see I live in United States of America,And if I read ember right you live in Southern Europe,So there's the shipping,And there has to be enough money for you to build another.What would you offer or like as a starting Amount?

atomicus submitter 2 Builds 1 point 12 months ago

I live in the UK. I am not sure shipping to the US is viable. A lot of risk involved there, chance of damage etc.

Digitalcosmos 1 point 12 months ago

Ya I see..Well if I can figure something out i will contact you otherwise,Peace

WaterTriber 1 point 12 months ago

290 +1 =291 upvotes. very nice!

Dolomats 1 Build 1 point 12 months ago

How mush this build really cost you ?

Don't think it's $2851.03 build

atomicus submitter 2 Builds 1 point 12 months ago

You can see the component cost... we pay more here in UK. If in US it would of course have been cheaper.

Dolomats 1 Build 1 point 12 months ago

seems the water cooling component isn't included in the Total

atomicus submitter 2 Builds 1 point 12 months ago

Ah OK, I'm seeing just under £3000 on my total... is it different? Actually the motherboard doesn't seem to have a price, not sure why, so it's more than what it says.

Dolomats 1 Build 1 point 12 months ago

here is how i see it in US version: http://hpics.li/f155464

atomicus submitter 2 Builds 1 point 12 months ago

OK, yeah something not right there, odd.

Timeman190 1 Build 1 point 12 months ago

this build is amazing and that does not come close to describing it. Any tips you would give someone who has never done a wrap before?

atomicus submitter 2 Builds 1 point 12 months ago

Patience, patience and more patience! It really isn't something you can rush, and with the cuts you need to think and measure carefully... no second chances obviously. Any edges that have less than half a cm you would be best to use 3M Primer on... that works brilliantly. I had to use that on every vent on the side panel, lots of tiny little cuts and a small brush, careful folding and lots of swearing haha! Each case will have its own challenges of course. A hairdryer is essential for right angle corners (i.e at the edge of panels), and I'd recommend the 3M brand as it's very versatile and hard wearing... I was surprised it could get very hot with the hairdryer and would take a lot of force to tear it. Having tried cheap vinyl before, this is not always the case! Any more questions just let me know. :)

Timeman190 1 Build 1 point 12 months ago

One other thing. Did you have to unrivit the case to get all in to all the detail? I notice that the corners are really nice and it looks like thats how the case is supposed to look.

atomicus submitter 2 Builds 1 point 12 months ago

No, I didn't do that, I just took my time and was very careful with the cuts I made.

Timeman190 1 Build 1 point 6 months ago

So its 6 months later and im finally about to wrap my 303 and was hoping for some advice. When you wrapped the back panel did you apply the primer to the depressed parts, then apply the wrap and then cut the slits in the wrap from the inside of the panel using an exacto knife?

atomicus submitter 2 Builds 1 point 6 months ago

Hi. Sorry for delay in replying. No, I made lots of slits and then wrapped the edges of the vinyl around, sticking them down with 3M primer (super glue for vinyl) on the other side. This process was INCREDIBLY time consuming though, and probably took longer than the entire rest of the build! I have added another couple of pictures so you can see what I mean, as it's hard to describe. You could use the method you described though, that would work OK I think.

DRAGONWARRIOR1028 1 point 12 months ago

Is this your first build? If so, it gotta say this build is one of the best I've seen on pcpp. Buying expensive parts can get you featured, but so can making your pc look amazing. Good job. By the way, i noticed that aion-mc, who works for ek, thinks your cooling loop is glorious. Amazing job man.

atomicus submitter 2 Builds 1 point 12 months ago

Yes it's my first proper custom loop. Messed about with things before and helped some friends out with builds, but this is by far most ambitious thing I've done. Wish I could afford to do it more! I have much love for EK, made this build so much easier with their build quality and ease to work with. :)

mrasperez 1 point 12 months ago

huff huff* HRRRNNGGHH!!

+1

ctrent04 1 point 12 months ago

bruh where did you get the money

atomicus submitter 2 Builds 1 point 12 months ago

I sold a lung ;) I did sell a lot of computer stuff, a TV I didn't use etc. some audio equipment... basically saved up and liquidated all my unused tech to make this.

ctrent04 1 point 12 months ago

so lets say i were to buy this how hard is it to put it together

atomicus submitter 2 Builds 1 point 12 months ago

In what respect? To buy all the components, tubing etc and make something like this yourself? I don't think it's hard, just takes practice and a strong sense of vision so that you know what you want the end result to be. :)

LonghornAlamo2040 1 point 12 months ago

HOT DAMN! +1

ikevpod@gmail.com 1 point 12 months ago

niiiice

ikevpod@gmail.com 1 point 12 months ago

if u use vr with this beast, you should have gone with nzxt s340 elite

atomicus submitter 2 Builds 1 point 12 months ago

The S340 is a nice case, but there are several reasons why I didn't choose it. It didn't have the radiator support I wanted for a start with no way to fit a 360. Also I wasn't keen on displaying my SSD's with that feature it has... I only have two anyway, and I wanted more space for hardline tubing. I also love the quick release glass side panel on the 303... that makes things so much easier as opposed to a screw in each corner (which all other tempered glass side panels do). I'm surprised no one else has copied InWin on this actually. I don't use VR either, but I agree it's a great case for anyone who does.

ikevpod@gmail.com 1 point 12 months ago

and you could have gone with MSI ek thing gtx 1080 it would have been easier with that plus its faster

atomicus submitter 2 Builds 1 point 12 months ago

Yeah that's a nice looking card, but I wanted something a bit more unique hence me going with the custom vinyl backplate. Plus it's a lot more expensive, and I didn't think it was justified for the small performance bump (which would be negligible). I don't do 'easy' haha! ;)

ngsieuviet1999 1 point 12 months ago

So glittering i like it

FcoEnriquePerez 1 point 12 months ago

Holy shhhhh..... I love your build!

Colomon 2 Builds 1 point 12 months ago

I have a build in the works utilizing the same Nemesis 360 GTS rads. What are your temps like? Do you find any difference between the ML120's and the Riing fans such as cooling/noise?

atomicus submitter 2 Builds 1 point 12 months ago

Excellent, idles around 18-20, never gets above 45-50 for CPU/GPU in heavy gaming.

I must say I am not overly impressed with the ML120's from a noise perspective... even at low RPM, about 650-700, they are probably the loudest thing in my system. But that is purely by virtue of everything else being so quiet. The Riing fans, pump and my PSU (in ECO mode) are inaudible at idle, only when things ramp up can the Riings be heard, but their sound is not unpleasant, more of a gently whooshing. The ML120's however do not make the most pleasant of 'tones', not to my ears anyway. I am nit-picking though, and as I say I can only hear them due to silence from every other component. If I end up not selling and keeping the system, I will probably swap them for some other fans when I come to change the coolant.

Colomon 2 Builds 1 point 12 months ago

Awesome thanks for your input!

DaAlphaSupreme 1 point 12 months ago

Great looking build. Crafty!

fang032301 1 point 12 months ago

Holy ****, and also does your e-atx mb fit nicely?

atomicus submitter 2 Builds 1 point 12 months ago

Yes, no problem at all, with ease. :)

fang032301 1 point 12 months ago

alright, I have an asrock z87 ofc eatx and the struggle to find a case like this lol

atomicus submitter 2 Builds 1 point 12 months ago

Yeah there's a lot of cases that won't take the extra width, but the 303 has lots of room. There are others though, it's not the only one. I am not sure of the exact dimensions of your board, but all new E-ATX boards are just about an inch wider, but the same height. Technically I don't think that's the 'official' E-ATX size, rather some new hybrid they've come up with. Traditional E-ATX was bigger I believe.

fang032301 1 point 12 months ago

I have the asrock Z87 OCF board and not sure if it'll fit in the 303 lol

atomicus submitter 2 Builds 1 point 12 months ago

I don't see why not... what are the dimensions of your board? Is it unusually large?

TheOminousBulge 1 point 12 months ago

Could you post cable management in the rear? :D

MortalTandoori 1 point 12 months ago

How much would you be willing to sell this for as I might be interested in buying this.

[comment deleted]
MortalTandoori 1 point 12 months ago

I'm coming to the UK in the summer however I live in the middle east , Bahrain so yeah are you sure you cannot ship this.Couldn't you just drain the loops and ship it? I will confirm my interest on buying this later on if the shipping is possible.

[comment deleted]
MortalTandoori 1 point 12 months ago

Hey bro if shipping isn't possible,Ill guess i'll build my own pc.Do you have any tips on how to watercool,you know how to set your loop and stuff that would really help.Did you design your loop first before buying all the stuff? Sorry if yo find this atrocious but I am new to pc building so any help would be greatly appreciated. THX =)

TheCy-FiJuggernaut 1 point 12 months ago

I love dark silver cases and bright coloured fluid!

Gutta 1 point 12 months ago

I hate it when I've finally decided on my own build after so much research and then some whackjob goes on to do something inspired and amazing that has me throwing my sanity out. :_( why you do this senpai, why?

atomicus submitter 2 Builds 1 point 12 months ago

I do apologise... but you're right, I am indeed a whackjob... ;)

DIAMONDDUD3 1 Build 1 point 12 months ago

<3

Rpurser06 1 point 11 months ago

As an owner of an Inwin 303, you sir have made me very envious. That titanium is sick... Would it be ok if I trade my car for this??

atomicus submitter 2 Builds 1 point 11 months ago

Thank you. Sure... providing you have a Porsche... ;)

Dehriz 1 point 11 months ago

Still my fav build

nickflow 1 point 11 months ago

would you think the Cooler Master Blade Master 120 R4-BMBS-20PK-R0 120mm would have been a quieter choice for the 120mm fans you have noise problems with? if not what would be the best 120mm fans to accomplish the quietest build possible.

atomicus submitter 2 Builds 1 point 11 months ago

It's hard to say... they aren't 'noisy' per se... it's just really the lack of noise anywhere else that makes them audible sometimes. They do seem to perform well though. I may find any fan audible given how quiet the system is. The Riing RGB fans I have up top are very good, and they look great. They probably wouldn't perform quite as well, but only to the detriment of a couple degrees. The BeQuiet Silent Wings would be good choice also I think.

mixxie 1 Build 1 point 11 months ago

i am stunned by the blue and purple combination it seems like in tron legacy or something...so beautiful and clean..the choice for the case is good inwin has a great reputation of building nice and neat pc case +1

Chubbby 1 Build 1 point 10 months ago

My new pc inspiration...gg +1

mynameiskc1 1 point 10 months ago

Hello. I just have a quick question. Can you run the thermal take fans off a fan hub and still select the rgb effect or do they have to be connected to the motherboard?

atomicus submitter 2 Builds 1 point 10 months ago

The TT Premium fans need to be run off a hub that comes with the fans. That hub then connects to a USB header on the motherboard and you control the fans via software in Windows.

mynameiskc1 1 point 10 months ago

Thanks!

PCsHaveBrains 1 point 10 months ago

love the color scheme, very sleek

mrdudeperson449 1 point 10 months ago

So when i try to build a parts list it says that the x99 xpower titanium is incompatible with the inwin 303 is that wrong or are there actual incompatibility issues that prevent certain clearance problems or something?

atomicus submitter 2 Builds 1 point 10 months ago

That is wrong, as obviously I have used it lol! There are no compatibility or clearance issues. If you are putting a rad+fans in the bottom, it makes things a bit tight, and you obviously need to attach all the headers down there first. You'd also need to install the M.2 drive beforehand as that won't be accessible once rad+fans are in place.

mrdudeperson449 1 point 10 months ago

Well thank you man. But like i said the compatability filter wont let me pair that mobo/case together and when i disable the filter i get that annoying warning in red at the top of my list

atomicus submitter 2 Builds 2 points 10 months ago

That's odd, definitely no compatibility issue, I can promise you that lol! Pretty obvious they go together haha! Obviously just an error with the website. :)

VanRayInd 1 point 9 months ago

Is it too late to add a whirlpool generator in the reservoir?

atomicus submitter 2 Builds 1 point 9 months ago

I am not sure what this is or what function it would serve?

FrankV01 2 Builds 1 point 9 months ago

This is an awesome build... probably one of my favs! But uh, where's the power supply?

atomicus submitter 2 Builds 2 points 9 months ago

Thanks :). The PSU is behind the fans/rad at the top rear. If you Google image 'InWin 303 PSU' you'll see. It's quite unique placement for a case, but works well.

SwiftSeb 3 Builds 1 point 9 months ago

I cant express how clean this is and how much i want to build it :D

PhuchopH 1 point 7 months ago

The blue and purple is uhhhmazzinggg!! Love it!

DominicBoccella 1 point 7 months ago

Nice Build Dude (:

MuchLinux6500 2 Builds 1 point 7 months ago

Oh my goodness!

blockbuster4664 1 Build 1 point 7 months ago

501st +1, this is an amazing build and I can see the time you put into it, bravo good sir!

Wolfe_oX 1 Build 1 point 7 months ago

Are the Corsair Fans able to be mounted onto a CPU Cooler?? Was going to buy them to replace h100 stock fans

atomicus submitter 2 Builds 1 point 7 months ago

Yes you can mount any 120mm fan on the H100, but I given the cost of the ML120s it's really not worth doing. You will see a negligible difference in performance.

theHavick 1 point 6 months ago

I think i fell in love.

Mafugma 1 point 6 months ago

Man, that is one of the nicest builds I've seen. My rig is close in specs, ran me more, and I wish it looked that good.

https://pcpartpicker.com/user/Mafugma/saved/Ztd999

Thought I was thinking ahead with the 750w PSU but it will surpass that by 6-10 watts if I go SLI with another FTW and SSD. I was thinking of using another FTW for a new 6800k build then passing it back to the 6850 for SLI with an 850w Prime Titanium PSU when the Ti's come down a little in price. Then close loop the 6800. Or should I go the Z270, 7700k route. I already have another upper-mid range X99 mobo. I need a tie breaker, can't decide.

atomicus submitter 2 Builds 2 points 6 months ago

An 850W could be ideal, but you might be OK with a 750W, especially if it's a Gold or Platinum rated model. I find the online calculators are very useful, just so you can enter in ALL your components, and then it will give you a recommendation. I find PSU requirements are very often overestimated, but I tend not to run SLI builds these days just due to the issues they have. They do look good when in a custom loop though.

I've deliberately stayed away from the 7700K due to the temp issues and need to de-lid to actually get the best performance out of it. And now Intel are saying you shouldn't overclock it... a CPU you specifically pay extra for in order to do JUST THAT lol! They can suck it. I'd rather give AMD Ryzen my money to be honest, although its gaming performance, while adequate, left me a tad underwhelmed. I'm waiting to see what X299 and X399 bring to the table.

If you already have an X99 mobo though, you would probably be able to find a second-hand CPU for a great price nowadays. Nothing wrong with X99 performance wise at the right price.

Mafugma 1 point 6 months ago

My PSU is a Seasonic Prime Titanium+. If any power supply would be capable it's this one. But it ends up being a moot point anyway. After a lot of thought, I'm in agreement with you about the adequacy of single cards and the troubles of SLI this generation. So I decided to put a single EVGA 1080 ti SC2 hybrid in my 6850k rig (it's basically an FTW3), get an Asus Essence STX II with some of the money I saved, and use my EVGA 1080 FTW hybrid for my next build.

I really, really, really, have been wanting to do a mini build for a long time and the FTW's reference card length and AIO cooler give it an advantage in a cramped case with limited airflow. Thinking maybe a Thermaltake V21. I'm not opposed to using a 6700k but will it take advantage of a Z270 mobo? I don't want to go i5, I need hyperthreading still.

I don't like what Intel is trying to sell with the X299 so far except maybe the 7740X. Not ordering or building until after their big reveal next month anyway and this PC is 100% optional, I can wait to see about the X299.

Thanks for your advice.

atomicus submitter 2 Builds 1 point 6 months ago

The 6700K is still a great CPU, and if you can get a good second hand one it's a bargain. You'll still get the advantages of the some of the extra features of a Z270 motherboard if you want to get one, and the 6700K willl run perfectly fine on it.

[comment deleted]
Hacker_Man 1 point 6 months ago

would you say that there would be enough room for a second card with the bottom radiator in there or would you have to remove it to have 2 cards ?

atomicus submitter 2 Builds 1 point 5 months ago

It would be possible, but you would need a thin radiator and thin fans, otherwise there would not really be room. It would also be quite a challenge routing the tubing, but with careful planning it would be possible.

rbosio 1 point 5 months ago

It's beautiful.... Me want.

Tehholypotato 1 point 3 months ago

Nice build! What cases with tempered glass would you suggest for custom water cooling?

atomicus submitter 2 Builds 1 point 3 months ago

Lian Li have a wide range worth checking out if your budget can stretch that far. Otherwise, Fractal Design have just released the Define C with a glass panel. Also the In-Win 303 is a good case. I would try to find something that can ideally take at least x2 360 rads if possible. It will allow for better cooling at lower noise levels, as you will be able to run the fans at a lower RPM.

Tehholypotato 1 point 3 months ago

Alright cool. Thanks man!

Sebvill96 1 point 3 months ago

What type of radiator did you use?

atomicus submitter 2 Builds 1 point 3 months ago

Hardware Labs Black Ice Nemesis 360 GTS.

ReaganDS 1 point 3 months ago

This looks amazing!

[comment deleted]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
atomicus submitter 2 Builds 1 point 12 months ago

Not really, it went smoothly really... the vinyl was the biggest pain, probably took the longest, especially that side panel with all the vents. I don't think I'd wrap a case in vinyl again, I'm too much of a perfectionist!

OwSo101 1 point 12 months ago

With a little bribery I am happy to say that I am getting a new PC for christmas and I am going to base it off this one because I like it so much!

atomicus submitter 2 Builds 1 point 12 months ago

Excellent! Glad you have been inspired! Now we just need to discuss licensing fee for using my ideas... :P

OwSo101 1 point 12 months ago

Shall do

[comment deleted by staff]
philip staff 10 Builds 3 points 12 months ago

Do not advocate piracy.

WirelessCables 1 Build 0 points 12 months ago

You will never take me alive, philip!

[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
atomicus submitter 2 Builds 1 point 12 months ago

Shame that most girls don't respond so well when I ask them if they want to come back to mine and check out my PC... ;)

[comment deleted by staff]
[comment deleted]
atomicus submitter 2 Builds 1 point 12 months ago

Excellent, no problems with the Hynix drives, I've owned a few of them.

[comment deleted by staff]
Gooberdad 7 Builds 2 points 12 months ago

Lol just pure awesomeness. It caught manirelli's eye and boom....featured.

[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
atomicus submitter 2 Builds 1 point 12 months ago

Hi, it's an XSPC LCD Temperature Sensor, the sensor part of which is located on a splitter on the bottom rad at the rear of the case.

[comment deleted by staff]
[comment deleted by staff]