PCPartPicker

  • Log In
  • Register

Build

Build-Blue

by random_system_builder

192
59 Comments

Details

Date Published

Sept. 11, 2015

CPU Clock Rate

3.2 GHz

GPU Core Clock Rate

925 MHz

GPU Effective Memory Clock Rate

1.5 GHz

Description

After graduating high school, I decided to do something over the summer so I wouldn’t be sitting around for two months. Building a case is what I decided to do and it took alot longer than I thought it would. I spent a good two months working on this case to make it just the way I wanted and it turned out better than I could have expected.

Link to the old build.

CPU – Microcenter had a good deal on it.

CPU Cooler – I wanted to try an AIO liquid cooler, so I got a cheap one.

Memory – I got this back in Febuary of 2012, when it was cheap and never had a reason to change it.

Storage – The V300 is from the previous build and I carried it over when I got the 500GB EVO.

Video Card - When I got this card, the fan on it was completely dead. I zip tied two 92mm PWM fans to the heat sink, so now it is basically a quadruple slot card, but at least it stays cool.

Power Supply – It’s a quality PSU at a decent price. Never had any problems with it unlike my previous CX600.

Case – This is where things get interesting. When I first started out on this project, I thought it would maybe take three weeks, but as I started to actually build it, I realized just how long it would take to complete the case in the way I wanted it to be done. I wanted to build a clear case that actually looked good. I had seen some cheap clear cases online, but they just didn’t look that great to me. I wanted to build something better. Something that could sit on my desk and not get scratched up everytime I touched it so it would still look good in a few years. The first thing I did was lay out all my test parts to decide how to place things inside the case. I took the measurements and bought the polycarbonate and aluminum to start building. After I made the frame, I cut each polycarbonate panel to fit inside. The hardest part of making the case was fitting the rear I/O panel. Luckily, I measured about twenty times before cutting and making the rear panel, so it actually fit. After I finished making the case, I took it all apart and plasti-dipped the aluminum. When I assembled the case for the final time, I added fan filters to the front two fans, bottom fan, and the PSU. Something interesting about the way the case is made it that the I/O panel goes in after the motherboard, because of how the motherboard secures onto the motherboard tray and how the I/O panel is put in from the outside of the case.

Overall, I am really happy about how the case turned out. I thought the mistakes would be visible and cables would ruin the look, but I was able to hide most of the cables behind the motherboard. The leds on the front fans, power and reset buttons, and the cpu waterblock really make this build pop in the dark.

Comments Sorted by:

Eltech 20 Builds 16 points 44 months ago

What hard work and determination for creating your own clear, customized case. Your two months on this has paid off. You have my up-vote for darn certain. Great effort and lovely job.

random_system_builder submitter 4 Builds 6 points 44 months ago

Thank you!

piemancoder 2 points 44 months ago

Dang it, you just said exactly what I wanted to say.

[comment deleted]
[comment deleted]
ThePickleCat 1 Build 5 points 44 months ago

If you put this much effort into college youll have no problem in life. Nice job

Vergere 7 Builds 2 points 44 months ago

If you had welded the aluminium, where you had cuts in the back, then ground off the excess then painted, this case would be very strong. Otherwise, great work!

random_system_builder submitter 4 Builds 1 point 44 months ago

Yea, I wish I could have welded the aluminum, but I don't have the tools nor skill needed for welding aluminum.

Vergere 7 Builds 1 point 44 months ago

If you can find a machine shop or a welding shop, they usually charge about $60 an hour. With the small corners you had to weld, it could be even less. But it's all painted now, so not much else to do besides admire the work you did.

[comment deleted]
rhali8 2 Builds 2 points 44 months ago

That case.... Is beautiful....

+1

Can I buy one? I would pay $100 for it :D

random_system_builder submitter 4 Builds 2 points 44 months ago

Maybe if I got them mass produced.

woodyscroll 2 points 44 months ago

How much would they go for? I am interested in buying.

rhali8 2 Builds 2 points 44 months ago

3D printing! :D

MetaApex 1 point 44 months ago

Which you should.

The.Geeked. 1 Build 1 point 44 months ago

make one in mini ITX size!

AION-MC EKWB 18 Builds 2 points 44 months ago

Love the project man! It was worth the hard work, grats on being featured

random_system_builder submitter 4 Builds 2 points 44 months ago

Thank you!

pegotico 2 Builds 2 points 44 months ago

great work! :)

+1

mlach 4 Builds 2 points 44 months ago

That is damn impressive! +1

Pierceoftheender 2 Builds 1 point 44 months ago

Cool. The video card is so makeshift, but it doesn't even matter because CLEAR CUSTOM CASE!!!! +1

random_system_builder submitter 4 Builds 1 point 44 months ago

Thanks!

Kimchi 1 point 44 months ago

Kewl

s.a.wood15 3 Builds 1 point 44 months ago

You, sir, are truly too legit to quit. Well done.

KENANTHONYREPAIR 1 Build 1 point 44 months ago

WOW This is off the chain dam good work very nice build in my book

Curcuma506 3 Builds 1 point 44 months ago

Impressive. Must have been fun. The result looks very good. Must be rewarding! +1

hamzaom675 1 point 44 months ago

WOW! How much did it cost to make the case? Also where would be a good place to start if i wanted to make my own case? You really made me want to make my own case. How are the Temps in the case?

+1 for Awesome and inspiring build!!

random_system_builder submitter 4 Builds 1 point 44 months ago

It probably cost a few hundred dollars for all the parts. Little things add up quickly. If you want to make one, then get some old parts for sizing so you don't damage good components. Also look up templates on the internet for fan holes and motherboard standoff locations. It's much easier to drill holes correctly when using a template.

cajunsloth 7 Builds 1 point 44 months ago

I really like the cable management in this build. Despite the fact it is a clear case, you managed to hide most of the cables behind the motherboard. Well done. +1

This case looks heavy as hell.

oushaba 2 Builds 1 point 44 months ago

nice build, also, how's the 8320E treating you?

isaborders1999 1 point 44 months ago

Sweet, talk about embracing the side window to its fullest. :D 1+

isaborders1999 2 points 44 months ago

Speaking of which, spray with some Windex and now you have a REAL PROBLEM

shadowfax6482 1 point 44 months ago

impressive

minimi2015 1 point 44 months ago

This is a great custom made case. Good work. There is one thing i don't see in custom made casing and nobody don't seem to mention it. I really think some people are missing the importance of grounding your motherboard. The MB screw mounts are their ground contact. They need some sort of connection with the power supply casing/ground. You should protect your hard work. A simple wire jumper will do the trick.

Danielesin 1 Build 1 point 44 months ago

This guy literally built a pc.

[comment deleted]
rhali8 2 Builds 1 point 44 months ago

YOU GOT FEATURED!

NICE!

:D

CrazyChief24 5 Builds 1 point 44 months ago

id love to do something like this, build your own case lol , id build a case around having (2) 200mm in the front and 2-200m on top and a 140 at the back and bottom, this is a cool build, i love it!

Kevers003 1 Build 1 point 44 months ago

Nice PSU ;) And wonderful close! +1

syntaxerrur 22 Builds 1 point 44 months ago

When are you starting mass production and how can I order one of these?

;)

Tooth 1 Build 1 point 44 months ago

I think you did a mighty find job! Love the look of "Clear"...

Where did u see clear cases at on line?

DS4130 3 Builds 1 point 44 months ago

Really great work, genuine respect +1

DarkDaedricLord 1 point 44 months ago

y isn't that case in production

GamerMan232 1 Build 1 point 44 months ago

I would pay for this case! :D

ivan_lazarov 5 Builds 1 point 44 months ago

Thumbs up for the case initiative! Although you can get a lot more functionality out of this volume this is perfect learning experience. I am looking forward your next even more awesome case : )

Dustworks 1 Build 1 point 44 months ago

Why no pictures in the dark? that would look great with the clear case

random_system_builder submitter 4 Builds 1 point 44 months ago

It looks really good in real life, but my camera sucks so the pictures in the dark are really grainy.

elvenson 5 Builds 1 point 44 months ago

Awesome job on that case. That looks like a very well done for acceptable costs kinda design. It came out excelent an you didnt even have to get too expensive with the materials and such, just a bit creative, which is nice.

That said, your next step should be an eventual swapping of that psu for a full modular with custom cables to really show off the clear case. If you can get or build a back plate for the gpu it would help also lol. the custom fans on it dont look too bad from the veiw in case, but the solder points are drawing major notice :P

random_system_builder submitter 4 Builds 1 point 44 months ago

Yea, a modular power supply would be really nice. I might look into making a gpu backplate, that would be awesome.

code69 1 Build 1 point 44 months ago

Nice build. Good choice of CPU

HamFather 5 Builds 1 point 44 months ago

Truly jealous of your creativity and patience, +1! Although what I'm curious about, what is that CPU cooler with the red fan in the early pictures?

random_system_builder submitter 4 Builds 1 point 44 months ago

https://pcpartpicker.com/part/rosewill-cpu-cooler-rcxz1

It's actually a good little CPU cooler for what it is.

CGIxHD 1 point 44 months ago

+1 Just because I started crying with joy when I saw this build

CaptainMurica 2 Builds 1 point 44 months ago

Has anyone else noticed that Micro Center is no longer on the list of merchants? What's going on?

oCollective0circuits 1 point 44 months ago

That looks great. Being that your build lives in a glass house, does it respond poorly to criticism? :P

Nice work.

JollyfellowYT 1 point 44 months ago

How much did the case cost to build?

MassOps 1 point 43 months ago

8320E? I mean ok I guess...

abracadavr 2 Builds 1 point 41 months ago

Wow, sweet custom case.

[comment deleted]
[comment deleted]
[comment deleted by staff]
[comment deleted]
random_system_builder submitter 4 Builds 5 points 44 months ago

Yea, the Diablotek PSU was just for sizing. It was really good for that because it's so light.

auldae 1 Build 1 point 44 months ago

Awesome. I wonder why it is so light. LOL. What a POS PSU.

[comment deleted]
tiny_voices 4 Builds 1 point 44 months ago

He got lucky. That Diablotek would likely have fried this PC for sure.

[comment deleted]
[comment deleted]
[comment deleted]
[comment deleted]
AION-MC EKWB 18 Builds 2 points 44 months ago

I'm sure somewhere in this world Jipster is giving a nod of approval