PCPartPicker

  • Log In
  • Register

Build

Lian Li Dynamic

by oquelus

Description

Started off as a graphics card upgrade and turned into an everything upgrade.

Comments Sorted by:

Zirf 1 point 4 months ago

that is one beast of a system +1

PrivatePengu 1 point 4 months ago

MORE FANS :D

blockbuster4664 1 Build 1 point 4 months ago

Why do u have The LL fans on the radiator? Since they are intake nobody will be able to see them. If you put the LLs on the bottom people can see them and three HD fans can replace the LL Ones on the radiator

oquelus submitter 1 Build 1 point 4 months ago

HD on bottom (intake) and top (exhaust rad). LL are on the side, had to mount them backwards as intake... wouldn't get them if I built again in this case :)

blockbuster4664 1 Build 1 point 4 months ago

Yeah they only look good when they’re in exhaust or on the front of a case with glass. Mounting them to the top for exhaust would probably make them look better.

AJ5000 1 point 3 months ago

I am using the same case for my build not sure which fans to get. If you could do it over again, which fans would you buy instead?

WPK_Tater 1 point 4 months ago

How is that mouse I need a new one and I have been looking at pulling the trigger on that one.

oquelus submitter 1 Build 2 points 4 months ago

I like it, had this one for a awhile now and it's still solid.

WPK_Tater 1 point 4 months ago

Ok, thanks for replying.

incendiarism 1 point 4 months ago

I currently have this mouse, and I love it a lot. I would recommend it.

Phildilf 3 Builds 1 point 4 months ago

How big are your hands?

I have medium sized hands and this thing felt extremely awkward. But, for some reason, all Corsair mouses feel weird to me. I had a Glaive for awhile and hated it.

Why can't Corsair make a normal shaped mouse? They all seem so bulky.

G502 has my <3 now.

Just my 0.02 :)

WPK_Tater 1 point 4 months ago

I have tiny hands

WPK_Tater 1 point 4 months ago

Are they too big or too small

SeanEXE 1 point 4 months ago

Awesome build! I'm actually doing a build very similar to this in this case but I was going to have three 120mm fans on the side for intake and have a 360mm radiator at the top for exhaust. How well do you think this would work? (I would rather avoid not having any bottom intake fans due to aesthetics/noise)

oquelus submitter 1 Build 2 points 4 months ago

That sounds similar to my setup but without the fans on the bottom. I added the fans on the bottom so there was more air being pulled into the case than being exhausted out the top. Noise isn't to bad - I have fan curves set up with a corsair commander pro.

VII77 1 point 4 months ago

You know what I like most about the O-11? They did the veritical GPU mount right. Pretty much centered between the glass and mobo. Nice build. +1

Dnehiba3 1 point 4 months ago

I know enoughs enough but you NEED the Lian Li strimer rgb cables to complete yourself. What’s wrong with the ll120s? Don’t like the look of the backsides? Looking at this case for myself, Corsair air 740 is up there too. Anyway looks fantastic, enjoy.

oquelus submitter 1 Build 1 point 4 months ago

I really like the LL120 but they don't look as nice from the back so kind of pointless in this build really :) My last case was a corsair air 740 and I much prefer the lian li.

SychicMind 1 Build 1 point 4 months ago

How'd you vertically mount your gpu? Nice Build! +1

AJ5000 1 point 3 months ago

Did you use the Lian li one? I ask because the lian-li one comes with two pieces and one of those pieces is installed on the bottom of the case holding up the GPU .

oquelus submitter 1 Build 1 point 3 months ago

It's the lian li one but I didn't use the piece for the bottom of the case, it's just hanging. I've been meaning to sort something more secure out.

ddmjr22 1 point 1 month ago

Hey, have you had any problems with setting up the gpu in that manner so far?

I really want to setup that card the same way you did, but I just want to make sure you haven't ran into any problems with having it hold up it's own weight like that.

Also, if you found another way to have it more secure like you brought up in the comment above, then please do tell as well.

Oatbhreaker 1 point 28 days ago

Would you recommend using the Lian Li vertical bracket (without installing the bottom part) over using the CoolerMaster vertical gpu kit (https://eu.coolermaster.com/en/case/case-accessories/vertical-graphics-card-holder-kit/)? I think your solution looks really nice, but I'm really worried about the card just hanging there..

Prysm_8 1 Build 1 point 4 months ago

Nice build, this is looking really similar to the build I'm working on right now lol

akshay1929 1 Build 1 point 4 months ago

GPU temps while gaming?

oquelus submitter 1 Build 1 point 4 months ago

Was just playing AC:O and it peaked at 68°C

TechTuberTV 1 Build 1 point 4 months ago

more pics of setup? +1

drescher99 1 point 4 months ago

NeEdS mOrE fAns!!!!!

Tragiik_Jalix 1 point 4 months ago

How do you like the T-Force XCALIBUR. I am thinking about getting the 4000mhz model

oquelus submitter 1 Build 1 point 4 months ago

It seems good. All I've done is load the XMP profile and it's working great. Nice change after the last kit I had which always had issues (corsair).

Liquid. 3 Builds 1 point 4 months ago

...

Speechless.... I came here to see if anyone had custom cables preferably white or white and black for EVGA SuperNOVA G2 and have found myself staring for 15 minutes at every intricate detail of your perfect build....15 minutes of my life well spent!!! This is one, sexy *** build mate!!!!! Well Done! 10/10

Afterglo 1 point 4 months ago

Wow, clean build. Notice any coil whine from the mobo with that psu? Looking to escape my asrock's screeching

oquelus submitter 1 Build 1 point 4 months ago

I haven't noticed any.

Droms 2 Builds 1 point 4 months ago

so much R G B.

TTV_IcyPeaks 1 point 4 months ago

What’s ur temputure of your cpu

davisthefreeman 1 point 4 months ago

Hows the graphics card working

Jpdots 1 point 3 months ago

Does this case comes with vertical mount? Damn how did u manage to do the gpu vertically and still put fans at the bottom!? Amazing!

Bloodham 2 Builds 1 point 3 months ago

How're you liking the motherboard? I'm mixed between MSI Ace and the AORUS Master.

Gucci_xan 1 point 3 months ago

HOT

onepropervillain 1 point 3 months ago

same bought as you! got the same GPU last night. Time to upgrade mobo and cpu!

Zosto 9 Builds 1 point 3 months ago

Hi there, explain me please how you hold the GPU vertically on top of the bottom fan? Its the bracket incompleto? Ir some Mod? Thanks

Kaleb152002 1 point 2 months ago

How is the ram?

I have heard that 3600mhz is very unstable and that it causes loss in speed and it can crash frequently.

Jfab21 3 Builds 1 point 2 months ago

Love the build, amazing. What did you use to vertical mount thr GPU? I have the same case and GPU but I can’t find a compatible 3 slot vertical mount.

xano124 1 point 2 months ago

Did you plug in both of those 8 pin cpu power connectors?

atomshrek 1 point 2 months ago

How did you mount the GPU without a support underneath?

Zosto 9 Builds 1 point 1 month ago

Very nice and very similar to mine, I promisse i did not knew before hehe :)

Corns0up 1 point 1 month ago

What vertical gpu bracket is that?

[comment deleted by staff]
oquelus submitter 1 Build 1 point 4 months ago

Yeah I hope so too, had waited over a month for the MSI trio and changed to the evga when I saw stock. It's running really well so far.

[comment deleted by staff]