Description

This build is awesome and looks cool. I bought a gpu backplate from v1 tech to add more color. great frames. Easy 150 FPS at 2560x1440 on high settings on all games. And this graphics card is MASSIVE so case room needed. My power connectors hit on the glass front. But still fits. Tightly. The cables for the graphics card do hit on the glass but it still fits. You just have to flatten them down a little. Make sure your fans will work with this case. The bottom and back of the case are just holes for the fan screws. The holes are not threaded. U may just have to go buy some small nuts to put on the back like I did.

Log in to rate comments or to post a comment.

Comments

  • 3 months ago
  • 2 points

I have fixed the gpu fitting problem. It does fit with no interference. U just have to push it in a little hard than normal.

  • 3 months ago
  • 1 point

I don't remember putting 8 fans in my first build XD well done comrade.

  • 3 months ago
  • 1 point

Yes a little overboard but looks nice

  • 3 months ago
  • 1 point

Post more photos

  • 3 months ago
  • 1 point

More photos added

  • 3 months ago
  • 1 point

PLEASE PUT UR GPU IN THE 16X SLOT YOU ARE LIMITING YOUR PERFORMANCE MY DDUDE. if you have to return the mobo or modify it. dont limit your 1.2k gpu

  • 3 months ago
  • 1 point

"The only thing that sucks is that this graphics card does not fit in the top pcie slot. Part of the graphics cards hits on one of the plastic motherboard covers on the bottom left."

  • 3 months ago
  • 1 point

i saw this but its just silly to unlock the potential of the gpu. he should get a new mobo

  • 3 months ago
  • 1 point

agreed

  • 3 months ago
  • 0 points

Get a new what?

  • 3 months ago
  • 1 point

mobo = motherboard

  • 3 months ago
  • 1 point

Ahh yes I plan on getting a new one. Apparently pcpartpicker support says that it does fit but it obviously does not.

  • 3 months ago
  • 1 point

Yes and I saw on other builds it fits but idk what the difference is

  • 3 months ago
  • 1 point

It hits on my motherboard but online it says that it will fit I plan on getting a new one but the fan underneath the graphics card is set to the same speed as the left graphics card fan so it is getting its airflow

  • 3 months ago
  • 1 point

I can not return it because pcpartpicker support says that it does fit and it obviously does not. So they will not take it back or exchange

  • 3 months ago
  • 1 point

Is there anyway to remove the plastic cover on that part of the motherboard

  • 3 months ago
  • 1 point

If anyone knows what motherboard would fit this graphics card and not interfere plz message a link

  • 3 months ago
  • 1 point

5.3ghz??? What's your voltage o.O

do you think i'd be fine attempting the same overclock with me kraken x62 (280mm) + Aurous elite?

  • 3 months ago
  • 1 point

I’m not sure but if you have a Asus mother board you can go into the bios and load a preset overclock. I did that and got a 38% overclock and then just did more to the cpu

  • 3 months ago
  • 1 point

I actually currently reduced it to 4.8 but on all cores

  • 3 months ago
  • 1 point

Oh yes as long as your processor is water cooled you are pretty safe on overclocking. And if your processor gets hot just make the fans run at a higher speed

  • 3 months ago
  • 1 point

Was it not 5.3 on all cores before?

  • 3 months ago
  • 1 point

No. I don’t know how to get 5.3 on all cores. I just uploaded a preset gaming overclock. Which was a 38% overclock. On all cores

  • 3 months ago
  • 1 point

Must’ve only been on 1-2 cores, rip :/ kinda misleading tp put 5.3 as your cpu clock rate, clock rate for these is supposed to be all core boost.

  • 16 days ago
  • 1 point

Did you replace the fans on the CPU cooler Ryujin? I noticed the fans are RGB but it comes with Noctua non-rgb fans i though. Looks great overall