• Log In
  • Register


Corsair 450D Build. Mainly used for Autocad, Revit, Rendering and minor gaming

by woobsy



Date Published

June 20, 2016

CPU Clock Rate

4.6 GHz

CPU Temperature While Idle

25.0° C

CPU Temperature Under Load

65.0° C

GPU Core Clock Rate

1.178 GHz

GPU Effective Memory Clock Rate

7.01 GHz


First computer build. Came out great. Haven't experienced any issues. DemciFlex dust filters have been installed to prevent dust entering PC. Cablemod RGB light strip has also been installed.

CPU has been overclocked to 4.6GHZ @ 1.4volts via Gigabyte EasyTune. Running at around 65Deg.

Comments Sorted by:

TechyinAZ 14 Builds 2 points 32 months ago

Cringe, 1.4volts. I hope you do realize that's WAY too much voltage for your CPU. If you can, never use auto overclocking software ever. Always go manual so you don't get CPU degrading in the next couple of years.

thejokster1 1 point 32 months ago

Is that much ram necessary for your uses?

ped90 2 Builds 2 points 32 months ago

32GB for a workstation is pretty much minimum, imo

ThugginMcMuffin 3 Builds 1 point 32 months ago

^ you are right. I run a couple of servers for VMs at home and our main one uses about 96GB of RAM at once If I remember correctly.

woobsy submitter 1 Build 1 point 32 months ago

currently I do use a quite amount of ram, maybe not the full 32gb, but it future proofs my system

thejokster1 0 points 32 months ago

Oh alright

convertedconsolegamer_92 2 Builds 1 point 32 months ago

This is still one of my favorite cases. Is the top drive bay removable?

woobsy submitter 1 Build 1 point 32 months ago

hey, the top drive isn't easily removable. It is held in place by rivets. If you really wanted to remove it you would have to drill them out.

wilpower 1 point 32 months ago

Nice build - what speakers are those? do you like them?

woobsy submitter 1 Build 1 point 32 months ago

they're these sony speakers which are about 20 years old haha. Have them hooked up to a sonos amp with sub. Still sound incredible!

almitie_moi 1 point 32 months ago

Q:did the motherboard have enough headers for the fans?

woobsy submitter 1 Build 2 points 32 months ago

just enough! my 3 case fans connect to the mobo headers. The radiator fans connect through the corsair cooler block which then connects into one of the CPU ports. Still has one of the CPU ports free

savantfool 3 Builds 1 point 31 months ago

it has only 3 4 pins for fans, minus the one needed for the cpu cooler. that's the fourth. I have the same and quite a problem with upgrading to better cooling. Still trying to fgure out how to get in more fans.

TheKation 1 point 30 months ago

How many fan headers did the Motherboard have?

[comment deleted]
woobsy submitter 1 Build 1 point 32 months ago

thanks man!