- 13 months ago
I built a new pc today, managed to turn it up using the front panel swith, donwloaded drivers and everything was normal until I decided to go to bios again to set up a couple more stuff ( Turned on password power on, Mouse double click power on and 4 seconds holding the power button to shut it down) and then saved and exit. It turned off, but I cant power up again. I tried absolutely everything, reattached all the cables, repasted de cooler and re set every component, but not one light came up during the process. I have tested my psu with the paper clip, worked fine. But still coudn't make it turn on again.
Here are the specs:
Gigabyte z390 UD I5 9600k Evga rtx 2070 G skill rgb 2x8 ddr4 3000 oc Psu corsair cx650m Case nzxt h500 1 tb ssd samsung evo 860 Noctua nh-15d
What I did: -Reattached all cables 3 times -Checked pins if were damaged(were not) -re set ram and cooler -rechecked the power switch - tried reset by cmus by shorting with a screwdriver - removed the battery for 3 minutos to force reset cmus -removed the rtx 2070 and started testing without it -searched for damage on the mobo, did not find
What I noticed: -After the bios save, my mouse rbg kept turned on after shutting the pc down, but I coudn`t turn the pc on - My motherboard uses a 24 pin for powering it and a 8pin+4pin for the cpu, I'm only using 8pin, becsuse my psu does not have one more 4pin available, but it worked perfectly on the first boot. -No lights were on during all tries
-Before entering the bios I had a blue screen witha boot error of some sort, but I can`t recall it.
Please, help me... I just spent everything I had to build this one...