Enthoo Luxe TG
ATX Full Tower
Side Panel Window
Tinted Tempered Glass
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
- SSI EEB
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
- 347 mm / 13.661" With Drive Cages
- 472 mm / 18.583" Without Drive Cages
- 560 mm x 235 mm x 550 mm
- 22.047" x 9.252" x 21.654"
External 5.25" Bays
Internal 2.5" Bays
Internal 3.5" Bays
- 72.38 L
- 2.556 ft³
- 75 points
- 45 months ago
from completed build DeepBlueII
Love this case! It looks great, unique window, variety of lighting colors, PWM fan hub, quality finish, functional dust filters for every intake fan, excellent cable management with Velcro straps. It arrived with the top bezel broken (naughty UPS). Phanteks customer service was phantastic <see what I did there> e-mailed proof of purchase and pictures of the damage and I they 2-day shipped the replacement part. A couple of very minor gripes (not enough to ding a star) is the screw holes seem to be cheap as some want to cross-thread. You just have to be careful and all is good. Also the front bezel has to be removed to clean the front fan filter, again, minor. I have never built in a better case!
- 47 points
- 59 months ago
from completed build Project R.O.B. (Red/Black Phanteks Enthoo Luxe Mid-Level Build)
This is one thing I decided I should cover. This thing is fantastic! Cable management is a breeze, and already comes pretty much done. It has these easy-to-use tie straps. It has two SSD slide in mounts, ton of drive bay space, and looks sick with the LED's. It also has a big color spectrum of LED's, however I just leave it at red for obvious reasons. It is super water cooling friendly. It comes with a ton of radiator space, along with pump and reservoir mounts. At this price point, I don't see a need to buy any other case besides this one.
- 36 points
- 51 months ago
from completed build 6600k | R9 390
The Phanteks Enthoo line is one of the best on the market. They are beautiful cases and also very high quality.
I love having the ability to add LED strips to this case and have a button built into the case to control the LED's. Not only that but it matches the outside LED's with the inside. Really is a very intelligent feature on their part.
Built in PWM fan hub is also a very useful feature. I refuse to have a bunch of fan cables running to the Mobo and messing up the the look. Especially when you take the time and put the money into having individually sleeved cables.
Other great things about the case is excellent cable management, a lot of space for radiators and fans(I have 9 fans and plan on adding more), removable HDD cages,. big window, and dust filters galore.
- 33 points
- 55 months ago
from completed build Dual 980 Ti Hybrid Extravagance
The Phanteks Enthoo Luxe is a beautiful case - big, solid, tons of extras and easy cable management. There's plenty of flexibility in building & mounting, which made it a perfect choice for getting in the 980 Ti Hybrids in SLI mounted cleanly and keeping good air flow. Absolutely a joy to work with and look at once it's finished.
- 18 points
- 40 months ago
from completed build Super 144hz build
As a first time builder, this case was a godsend. Cables in the back came pre-routed, labelled, with step by step picture instructions in the manual. This case had everything I needed from extra screws that were separated into plastic containers, lots of expansion options and combustibility, and easy cable management with included velcro ties.
The best part is that it looks sleek without looking like something out of a sci-fi horror film like most other 'gaming' cases, but it's not bland enough to look like an old refrigerator.
- 15 points
- 42 months ago
from completed build The Beginning - Darkness
Great case, feels quality. very large. Some small issues: Missing Mobo stand off for the far right middle stand off for my Mobo, Gigabyte GA-Z170X-Gaming 3 ATX LGA1151(below ram), when pushing on that far side of board i need to open other side of case to help support. I do no know if this is a Mobo issue or case issue?
- 14 points
- 44 months ago
from completed build That's Right its Red and Black (First Build)
Great case really easy to work with. the lights look really good but I would recommend getting one of the led strips that Phanteks sells for some interior lighting. Link to light strip https://www.amazon.ca/gp/product/B00M0R2OTG/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
- 11 points
- 51 months ago
from completed build VR-Ready upgraded desktop
Nice case at a good price. Make sure you buy the optional light tape for it if you want it to look like pretty much every picture you've seen of it anywhere.
- 11 points
- 41 months ago
from completed build Car fund
HUGE case, I love the design and the multicolor led strip is a nice touch. a breeze to build in.
- 11 points
- 31 months ago
from completed build First Build
Impressed with this case. Comes with some good quality fans. RGB is a nice touch but not overdone. If you attempt to put a 140mm fan in the bottom towards the front be warned that you will only be able to get two screws into the fan.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters