|( 3 new from $64.98 . Last updated 15 minutes ago. )|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
370 mm / 14.567"
Internal 2.5" Bays
Internal 3.5" Bays
- 19 points
- 21 months ago
from completed build Budget 1050Ti build
Positives: - Oddly managed to buy cheaper with the window than without, which is unusual, however looks slick as anything. - Came with two fans pre-installed, always a bonus.
Negatives: - Acrylic window will scratch super easy so recommend using microfiber cloths for cleaning. - An odd choice to have the Power-on LED blue while shipping with a Red LED fan.. - Large mesh cutout on the top without dust filter attached, obviously intended for a 360mm+ however I was not planning on watercooling so this just acts as a huge gate for dust and other particles to get into my system which is quite annoying...
- 16 points
- 29 months ago
from completed build 1440p 165hz Gaming Build-First Build
Good Budget case. Nice PSU shroud, nice looking plain black look, Plenty of room to build in. Like the hidden drives. Gets 3 stars because the lack of dust filters. The top of the case might as well be open if there isn't a radiator installed. No dust filter on the front either, just overlapping plastic meshes which do keep at least some dust out. Does have a dust filter for the Power supply on the bottom. Front I/O is very subjective, being that it is on the right side of the front cover. Works perfectly for how my system is setup, but just keep it in mind when buying. Overall a good case. I would totally recommend it if you can get it on sale for cheap, but I would shop around first if MSRP.
- 11 points
- 6 months ago
from completed build $800 Setup
Great case, easy to build in. Good pickup for 30.
- 10 points
- 34 months ago
from completed build Time for an Upgrade in 2017
Joy to build in. Good air flow, lots of cable management options and hidden HDD/SSD drive mounts.
- 8 points
- 22 months ago
from completed build Updated console killer
For a cheap case you can’t beat it sure it has an acrylic window but it’s layout is one of my favorites simple clean with lots of room looks beautiful once everything inplace and lit up
- 7 points
- 14 months ago
from completed build The Sardine Shop [First Build]
Easy to use, but hard to get off the front panel.
- 6 points
- 21 months ago
from completed build 1800$ Gaming and Productivity Build
A great looking case, especially at this price. Has quite good cable management but could use some more holes here and there to route cables through. The biggest problem for me atleast was mounting the SSD and HDD in the back. The way you mount them is extremely inconvenient. The manual lacked alot too. Wasn't sure which screws to use to mount the HDD but found some that worked in the end.
- 6 points
- 20 months ago
from completed build Clean, Budget, 2nd Gen Ryzen
Decent build quality, good room for cable management, good looks. But I cannot stand the front panel buttons. It's horrible. If you can look past this, it's a great budget case.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters