|$89.99||+$11.99 s/h||Out of stock||$101.98||Buy|
|( 5 new from $116.30, 1 used from $87.74 . Last updated 1 minute ago. )|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
- LANCOOL II-X
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-C
- USB 3.2 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
384 mm / 15.118"
Internal 2.5" Bays
Internal 3.5" Bays
- 26 points
- 2 months ago
from completed build Cyber Titan
Great tower with lots of features. Super-duper easy to build in and route your cables. Great airflow too, I run a 3/3 config but it can fit up to 8 120mm fans. Easy to clean and access your storage devices.
- 20 points
- 21 days ago
from completed build Dragon Theme PC (+ Setup)
One of the main reasons I was excited to make a new build. It was easy to install components, lots of space on the bottom and side to hide cables, and it looks great. The lights and ease of opening the glass window are awesome. Only difficult part was installing the USB 3 cord (not included).
- 13 points
- 3 months ago
from completed build Christmas PC Build
I was lucky to get this early. It's an awesome case! So modular, and the front RGB strips are spectacular!. The only gripes I have about this is it says that there is a USB-C port, but on the case there is none, and that one of the magnetic panels won't close fully. Other than that, 5 stars! The front RGB strips can be controlled via your motherboard's software. Do note that the connector for it is a male connector.
- 13 points
- 3 days ago
from completed build The Quarantine Machine
Great mid-range, value case for a wide variety of builds, up-to and including eATX motherboards. Multiple storage options, which includes 3 x 3.5" drive bays (can be completely removed if not necessary), 2 x 2.5" drive mounts in the rear and obviously, as many M.2 slots as your motherboard will support. Includes 3 Lian Li stock fans as well. Cable management is as easy as it gets, with 2 plates in the rear to hide your mess. Overall, very easy to build in but still with tons of options for various cooling and storage setups.
- 9 points
- 16 days ago
from completed build Premium Ryzen 5 Gaming OC
10/10 everything accept 7.5/10 thermals. If that bothers you than I understand, but at its price its such a great product and very versatile case. You could do so many different builds in it, but Lian Li dares you to make a show stopper.
- 5 points
- 11 days ago
from completed build Triple-Zero
A solid case with lots of room. It breathes well and has looks great! I really took advantage of the removable fan front fan cage to get three installed as a unit and work on their spacing instead of one at a time in more restrictive areas. A note about the metal: it is coated and has a good feel. Opening are not sharp as the coating keeps them from cutting fingers and cables.
The only downside, for me, is the back window, SSD/HDD cage, and top room. If you are using 3.5 inch factor HDDs then you have to keep the cage. That limits the cable management you can do with the cables to/from the PSU. Because of the back window and cage I found that I had trouble looking for spaces for the RGB fan hub and fan controller (both Corsair, as that's what all but one of my fans are). I ultimately managed them decently but put them where they could be seen. I doesn't really affect how things look. As for top room, it is impossible to get to the CPU power connectors and top addressable headers if you are using a radiator with fans. The rad and fans have to be removed to get to them.
That said, the included fans CAN be controlled by the Corsair Commander Pro. That's an unexpected plus!
An improvement would be to move away from simply metal cutouts and add rubberized openings for cables. That would "flatten" the whole interior as there is currently a raised portion to run cables from behind the main tray to the front. Another option would be to have the raised part just to the right of the MOBO extend significantly across the interior all the way to where the fans are. Again, that would still lead to good looks and provide SIGNIFICANT additional room for cabling to be hidden. A further improvement would be to increase headroom above the mobo to account for fans and radiators.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters