The case itself looks good & feels good but if i had to redo the machine i would use an ITX motherboard so i can access more cable holes. The side panel mounting is absolutely trash since you have to physically hold the glass panel on while screwing the screws in. Would have been much better if you could secure the panel on pegs for example and then scew it on. Also if your using cable extensions it might be a bit cramped in the back compartment if you have both the 3.5 and 2.5 cages installed.

Really like the case, but perhaps wouldn't recommend it.

Beautiful case. Cable management is great. It says it can only fit GPUs with a length of up to 300mm but I was able to fit a Vega 64 in there (310mm). Be sure to get window cleaner with this case as it is very easy to get finger prints.

Good, sturdy, pretty case, PCIe bracket grips suck.

Airflow is fine, I don't know why people complain. It's obviously not going to be as good as cases designed for it, but for having three TG panels the temps are not bad at all.

Pros: Good looking. Very easy cable management. Easy to build.

Cons: Build quality could be better. No USB 3.0 type C.

Clean and shiny, with plenty of room for cable runs and storage.

Both the HDD and SSD cages are removable so you can clean up the rear compartment. The HDD cage makes the top of the motherboard a bit hard to access for things like fan and RGB headers, but if you take it out you should be able to make your runs and put stuff back in. Airflow is good enough, could probably be improved if the front glass panel were removable.

Only con I can think of is the size. It's mATX in spirit, but the case itself is hefty. I wouldn't count on carrying this around for LAN parties or trying to fit it on a small shelf. Also, you cannot lay this model on it's side like you could with the Air 240. Unfortunate as that provided an interesting look and relieves the stress of component sag.

cons: heavy , wide , air limitation using the filter , this case need to be redesigned, the back has grill but you cannot put a 120mm fan , the bottom has room for a fan ( or 2 ) depending how you install your gpu but the filter is so close to the ground and need a booster to make a fan usefull. get a windex with the case .