This thing is huge. It's gigantic. It's almost too big. However, I have since come around to its size. After receiving my GTX 970 in the mail I was glad I went with such a large case. For my first build, the large case made installing everything super easy as well. Cable management in this case is pretty good. Lots of room to hide cables behind the motherboard. It comes with all the screws, stand off pegs and whatnot you'd ever need. The middle cage of 5 HDD slots can be easily removed with thumb screws for airflow/liquid cooling, leaving three HDD slots on the bottom still. The HDD trays are hardwareless, which is really nice. The HDD just pops right in. SSDs will still need to be screwed in to the trays - if you use trays for SSDs. It has three 5.25" bays which are also tooless. I installed a DVD drive in a matter of seconds which was awesome. Just slide it in and slide the lock mechanism closed, done. Comes with 5 fans preinstalled, dual fans with blue LEDs in the front, one exhaust fan in the back and another dual fan on top for exhaust. The top is cool as it has vents you can open and close. It has four USB2 ports on the front, two USB3, and headphone/mic jacks, as well as power and reset switch. It also has two switches for its built in fan control. Call me a noob, but I could not figure out how to utilize the built in fan control. This was one of the reasons I bought this case, so it is disappointing that it's not mentioned at all in the manual that came with the case. As my first build there were many things I ran into where I needed to seek assistance from the Internet, and sadly this build in fan controller has still eluded me. The fans default to 64%, not 100% like I initially believed. The fans are 3 pin, not 4 pin PWM. There are ways to raise the fan speeds with software but for whatever reason I cannot seem to get that to work. This really isn't much of an issue as the airflow in the case is superb and I have yet to run into any heat issues. There are ways to control the fans within my motherboards UEFI, I have yet to see if they work or not. Really wish Rosewill would have explained how to wire up the built in fan controller. I'm taking off a star for no instructions on it, not because I can't figure it out. If there were some basic instructions I'd be able to figure it out. I wouldn't pay more than ~$100 for this case. I bought it for about that much with a mail in rebate. It is super sturdy, being made mostly out of metal/steel. This makes it heavy, but it's not really meant to be portable - it's a full size case! I like that it came with the option to add one more fan in the bottom, and that it came with a dust screen for the PSU fan.

Got everything hooked up, turned it on and started a little fire with the fan controller connections on the nighthawk case.

other than that it works fine

Nice an large, to fit my cooler.

I also like the hot-swap SATA drive bay on the top of the case. In the past, I've sometimes needed to attached a SATA drive externally and dislike when it flops around lose outside the case. I expect I'll use this drive bay in the future.

Note: I've noticed something unusual. Three times recently, when I attached a USB device to the front case's 2.0 USB ports the PC will reboot. There's no error, no BSOD, just an IPL reboot. I'm going to monitor this more. Is it a case problem or motherboard problem?