( 4.0 Average / 3 Ratings )
Send an e-mail alert if the price drops to: $
(Note: Price alerts now use your merchant selections and tax settings.)
Cheap, short, bulky. Perfect for my setup as I needed something short enough to fit in my desk and wide enough to fit backside cable management along with a large cpu air cooler. It also does in fact fit a Corsair H100i when mounting the radiator on top. You will want the tubing along the rear of the case and to use a slim rear exhaust fan. This also fits very large graphics cards (including my 1070 amp! extreme which is over a foot long) as the hard drive cage starts about 3 slots down vertically from where the card would be installed. As long as the card isn't somehow longer than the case it will fit.
Good, Cheap case.
I got this case on sale at Amazon for $44 with free shipping, the shipping took 1 and 1/2 weeks. When I got it the box had a dent in it, but the case was fine, that's what matters anyways.
When it says THUMB screws, it isn't really THUMB until you unscrew it and screw it back in a few times with a screw driver until its able to be screwed with your thumbs.
The MOBO standoffs are a bit cheap, I stripped one while I was doing cable management. DON'T be like me and do that, if you're going to use the CPU cable cutout then PUT THE CABLE THROUGH it first! I had to unscrew my mobo and stripped one of the standoffs.
The painjob wouldn't be the best, as some edges don't have enough paint, or its chipped.
Another thing I liked is that the expansion slot covers ARE screwed in, NOT like the other cheap cases with BREAKOFF covers.
The case has alot of room for cable management, and the cover fit easily back in after I did some cable management. I'm guessing it would still fit if you don't do any, but I would recommend DO IT!
I would recommend this to any builder on a tight budget.
The fan LEDs are simply amazing to look at. The cable management was a slight problem, as there were very few holes and none above the motherboard, so I had to snake them through the hardware