• Log In
  • Register


Gigabyte GA-H110M-H Micro ATX LGA1151 Motherboard

( 3.8 Average / 4 Ratings )




Part #


Form Factor

Micro ATX

CPU Socket



Intel H110

Memory Slots

2 x 288-pin DIMM

Memory Type


Maximum Supported Memory


RAID Support


Onboard Video

Depends on CPU

CrossFire Support


SLI Support


SATA 6 Gb/s


Onboard Ethernet

1 x 10/100/1000 Mbps

Onboard USB 3.0 Header(s)


Completed Builds Using This Part

See All Completed Builds


Merchant Base Promo Shipping Tax Availability Total
Newegg Marketplace $62.52 +FREE s/h In stock $62.52
OutletPC $63.29 $63.29+

Price History (Excluding Tax & Combo Deals) History:


ChaosDragonLord 2 points 12 months ago

The BIOS looks nice and is relatively easy to use, however upon booting it makes a loud beep for about 3 seconds, and there is no way to disable it. Also, UEFI makes dual-booting linux a pain (although that is not an issue specific to this motherboard). As far as the actual motherboard goes, it is mostly black with some white highlights and looks quite nice. It's got 2 RAM slots, but only 1 PCIE slot, and also there is only 1 fan power socket on the motherboard, so you can only use 1 extra case fan.

Axeyy 5 points 8 months ago
from completed build 2016 Skylake 2nd Rig

Simple Motherboard, has the features i needed. Cheap and no issues with it.

Invenixx 23 points 6 months ago
from completed build Office/Gaming PC Build

Decent motherboard, ran in to a few problems with drivers for my network adaptor, not sure if it was to do with the OS or the MOBO. Has all the sufficient parts needed for the build. Doesn't look great but the bios is easy to use. Would recommend for an entry level build!

KevinMoondust 10 points 1 month ago

I exclusively pick GIGABYTE motherboards because they are the only brand in Argentina that offers RMA support, even if you're stupid enough to bend a pin in the socket. The GIGABYTE board is not perfect... It's about time they put a better UEFI solution for the low-end boards. The yellow LED strip on the audio chip and caps is unnecessary, and one thing I don't like and it's trending lately, is the fact that only one of the two RAM tabs (per slot) can be opened. Yes, I know it has to do with clearance for the GPU, but yet still, I've got no problem if I've got to undo screws and uninstall the GPU to install RAM or change RAM. Other than that, nice PCB thickness, subdued colours all around, and port selection in the rear I/O is sensible enough.