PCPartPicker

  • Log In
  • Register

Comments

brazilianloser's Completed Build: MJ Project Part 3

AidanRiches 2 points 4 hours ago

Looks sick.

ninamarie8253's Completed Build: GLaDOS - An RGB Lian Li Case Build for 3D Rendering

AidanRiches 1 point 3 days ago

Oh ok, :)

Sneakdella's Completed Build: Bertha the Beautiful

AidanRiches 3 points 5 days ago

bruh read the desc

ninamarie8253's Completed Build: GLaDOS - An RGB Lian Li Case Build for 3D Rendering

AidanRiches 2 points 6 days ago

Looks really good but didn't you say that you came from a build with 4 1080ti's? Isn't that a bit of a downgrade considering that the RTX 2080 is about equivalent to a 1080ti? (unless the work you are doing is using the tensor cores in which case everything I said is kind of irrelevant) but still looks really good :) +1

Jocksel's Completed Build: Simply Minimal mATX

AidanRiches 1 point 14 days ago

Why get an 8600K if you weren't going to overclock, even at the lowered price?

justinblink's Completed Build: i9 Consumer Version

AidanRiches 2 points 14 days ago

How much clearance do you have between the Rad and the RAM as I want to top mount a rad in this case and wonder if it will fit. Amazing build btw, looks stellar!

robwondah's Completed Build: Sidewinder Build

AidanRiches 1 point 15 days ago

No problem :)

robwondah's Completed Build: Sidewinder Build

AidanRiches 1 point 15 days ago

Nice build, have you seen the thermaltake riing trios fans? they can sync with razer synapse so your whole pc and peripherals will be synced (just an idea)

ScrewyNinja's Completed Build: 8700K Gaming Update

AidanRiches 1 point 21 days ago

minwoomint's Completed Build: Simple.

AidanRiches 1 point 22 days ago

how did that top mounted rad fit with the trident-z as it says that it would be too tall. (I am wanting to mount a rad at the top in the same case and I want to know if it works or not.) and also if you could tell me how much length the vertical gpu mount adds that would be great :)

LCL_Top_Gaming's Completed Build: $10,000 ROG Mayhem

AidanRiches 3 points 26 days ago

isn't the 2990wx not very good for gaming because of its low frequency even with gaming mode on?

eliteness47's Completed Build: Z390 RGB refresh

AidanRiches 1 point 1 month ago

Ok thanks, I just wasn't sure :)

eliteness47's Completed Build: Z390 RGB refresh

AidanRiches 2 points 1 month ago

Nice looking build, what are those fans because I can't see them listed.

yusufkus's Completed Build: Stormtrooper 240

AidanRiches 1 point 1 month ago

its at a really good price right now

Mattyk35's Completed Build: The Beast 1.0 First Pc build

AidanRiches 1 point 1 month ago

that card looks sooooo good. Nice build btw.

amf812's Completed Build: The NZXT Prime 2080

AidanRiches 2 points 1 month ago

why do you have your gpu on the bottom PCI-E slot??

ecsb87's Completed Build: @the_mold_shop Workstation

AidanRiches 1 point 1 month ago

oh cool.

ecsb87's Completed Build: @the_mold_shop Workstation

AidanRiches 2 points 1 month ago

what is that second card?

aznsniper911's Completed Build: My Last Build As A Single Man V2

AidanRiches 1 point 1 month ago

so what job do you have?

mikeo77's Completed Build: The Brave Little Toaster

AidanRiches 1 point 1 month ago

ok thanks <3

mikeo77's Completed Build: The Brave Little Toaster

AidanRiches 1 point 1 month ago

I was looking at getting the a1, is the PSU really that bad? ( this with a 1070 and a R7 1700). nice looking build btw.

Hadouken007's Completed Build: Seven

AidanRiches 2 points 1 month ago

five

MathewJLOneT's Completed Build: Project Revamp - Post Collegiate Upgrade

AidanRiches 2 points 1 month ago

I was going to go with much the same cooling solution and gpu, relief to see that it all fits in the meshify. nice build btw.

kBessa's Completed Build: Home Theater Gaming PC

AidanRiches 1 point 1 month ago

Nice build dude, how are the temps though?

Nayan.P's Completed Build: Quiet, unsuspecting i7 8086k gaming rig

AidanRiches 2 points 1 month ago

He is only running 75hz monitors, I doubt it will make a difference.

J-Side's Completed Build: Cypher-D

AidanRiches 2 points 1 month ago

Nice build man :)

warherolion's Completed Build: Hades

AidanRiches 1 point 1 month ago

oh sry missed that part :)

warherolion's Completed Build: Hades

AidanRiches 1 point 1 month ago

is 8gb of RAM enough for what you are doing?

Donrox's Completed Build: Matte Black Everything

AidanRiches 1 point 1 month ago

Tell me how that goes. thanks though!

ScrewyNinja's Completed Build: 8700K Gaming Update

AidanRiches 1 point 1 month ago

All you need now is some backplates for the GPUs and then you'll be sweet. Good build though.

Donrox's Completed Build: Matte Black Everything

AidanRiches 2 points 2 months ago

How is the 9600k doing? I was looking at buying one and I also have a 2400mm aio but I am not sure whether to get it or the 8600k, thoughts?

Keith_Horton's Completed Build: Project "External Radiator" On SuperNova

AidanRiches 2 points 2 months ago

Amazing work. +1

patb2017's Completed Build: Duke Cerberus X

AidanRiches 1 point 2 months ago

oh ok well thats good then. :)

patb2017's Completed Build: Duke Cerberus X

AidanRiches 1 point 2 months ago

why would you get sleeved cables if you can't even see them?

Pantha's Completed Build: Dad's Ryzen Rebuild - 2018

AidanRiches 1 point 3 months ago

yes

RadRayven's Completed Build: RadRayven Gaming/Streaming PC

AidanRiches 2 points 3 months ago

Hi Tim :)

Forum Topic "First Build. $2000+/- Rainbow 6 Siege machine - need help"

AidanRiches 0 points 3 months ago

hi.

joebash_ep's Completed Build: Corsair 570x Dual Loop

AidanRiches 1 point 3 months ago

Amazing bends, love the colour scheme just an all round amazing build. Can't wait to see what you next build!

Yuki-iSM's Completed Build: Darker than... RGB?

AidanRiches 1 point 3 months ago

nice build, hope all my stuff fits in the meshify c!

blackzaru's Completed Build: Keeping it classy. A black and white themed build.

AidanRiches 1 point 4 months ago

I'll be building a black and white build as well, although sadly I shall be bowing to the RGB gods. Very nice build(I hope mine looks half as good).

colsonyoung's Completed Build: ShadowFax (First Build)

AidanRiches 2 points 5 months ago

Yeah a black and white one though I'm not sure whether I will start building until the coffee lake refresh has hit as I may pick up one of those.

colsonyoung's Completed Build: ShadowFax (First Build)

AidanRiches 1 point 5 months ago

Thanks, looks like I will be using them in my build then. :)

colsonyoung's Completed Build: ShadowFax (First Build)

AidanRiches 1 point 5 months ago

I was thinking of using the same RAM as you, how do they look and perform? Nice looking build btw. +1

DeadpeopleRising's Completed Build: Blue Betty

AidanRiches 2 points 5 months ago

mmmmmmmm

MrVeetrin's Completed Build: Lapis Lazuli

AidanRiches 1 point 5 months ago

That's good, I just wanted you to know just in case :)

MrVeetrin's Completed Build: Lapis Lazuli

AidanRiches 1 point 5 months ago

Does the i5 8400 perform properly with the b360 motherboard, I've seen people say that it dramatically under performs with one. Other than that nice build.

farrons's Completed Build: First PC done!

AidanRiches 1 point 5 months ago

Looks amazing dude.

jl140's Completed Build: Samurai ?

AidanRiches 3 points 5 months ago

Looks amazing, nice bends!

navywolf's Completed Build: First Gaming PC - Now upgraded

AidanRiches 1 point 5 months ago

Looks amazing, would love some more photos though. +1

vncsnty's Completed Build: Project NeuChroma

AidanRiches 5 points 5 months ago

I love the metal tubing, it gives it such a premium look. Btw are you going to add a pic showing it powered on?

Page
1