PCPartPicker

  • Log In
  • Register

Comments

PCPartPicker Blog Post "Meshify C Mini / X399 mATX Build"

Arden_Computers 1 Build 1 point 11 months ago

Just a stunning little build.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 11 months ago

Thank you very much!!! I hope my next one will be as appealing.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 11 months ago

No. There is not enough clearance from the rad.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

Ha! I do prefer The Dark Lord in black.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

No video but there must be something on YouTube. It’s basically 6 screws to removed the fan shroud on top, six screws to remove the heat sink from the chip and then 8-10? Screws to remove the backplate from the board. Led connectors simply unplug. Don’t be scared, just be careful!

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

It’s already on my mind.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 6 points 12 months ago

Rights have already been forfeited to my wife...Like everything else I own. (Sorry, she owns) :D

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

To say it feels great is an understatement. It’s only downhill from here :D

I’ve looked at other recent builds and I can see at least 3 that I think should have featured before me...especially Thatoe’s Little Shoebox build. It’s awesome.

bobbyw87's Completed Build: Blue

Arden_Computers 1 Build 1 point 12 months ago

Very nice little build. The H200i is my favourite Mini at the minute. Might have to try a Lian Li next.

What you going to build next???? :D

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

Thank you! I think just controlling myself and not 'overdoing' the pink helped. Less is more I guess.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 4 points 12 months ago

Holy crap!!!

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

Didn’t pull the thing apart no. Just used lots of paint tape and paper.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

You have 1 usb 2.0 header and 1 usb 3.0 header internally.

Thatoe's Completed Build: Little Shoebox

Arden_Computers 1 Build 1 point 12 months ago

I was looking for a "different" mini-ITX case for my next build. There are a couple on Kickstarter now with this and one from Thor-zone.com I like this one a lot though. Not showy or over the top...just does it's job.

It's perfect and you've done a great job.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

Do it! So many options for minis now. I hope more people ask me to do mini builds.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

I’m upset by this...it’s hurt my feelings.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 2 points 12 months ago

It actually doesn’t regards fitting the rad. I did ‘fret’ about it for a little while as I had read online about closed loop systems needing to be mounted the opposite way for correct operation. However, I looked at ALL of NZXTs promotional photos of Krakens fitted to an H200i...they’re all fitted with the hoses from the top. I guessed if it’s good enough for the manufacturer...

And regarding the gap as soon as I’m home I’ll post more pictures. I’m in Norway until the end of March though so hopefully you can wait that long.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

Thanks so much for the feels.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

Dude, your words give me a warm fuzzy feeling!

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

In fact, in picture 8 you can see how very very close it is. Will get better pictures of it when I’m home.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

Currently in Norway so will have a look and see if I have any pictures of how “snug” it is. It’s a very close fit between the GPU cover plate and the bottom of the AIO rad.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 1 point 12 months ago

Thanks, I must have sat on the idea for 3 weeks before commiting. Needn’t have worried, it turned out as planned.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 2 points 12 months ago

Socking it to the man...in my own, understated way.

Arden_Computers's Completed Build: Pink Vader - Mini-ITX

Arden_Computers submitter 1 Build 10 points 12 months ago

If this gets featured I will literally EXPLODE with excitement!

Page
1