PCPartPicker

  • Log In
  • Register

Comments

DawnoftheDave's Completed Build: Shoebox Powerhouse!

DawnoftheDave submitter 3 Builds 1 point 20 months ago

There is enough clearance to answer your first question. You would have to buy an ATX to SFX bracket off of Amazon.

DawnoftheDave's Completed Build: Shoebox Powerhouse!

DawnoftheDave submitter 3 Builds 1 point 22 months ago

Yes there is about 3/4 inch of clearance. temps are normal.

Ayrus's Completed Build: The Fade to Black

DawnoftheDave 3 Builds 2 points 23 months ago

Same here! Silverstone SG13 is only $39.99 on amazon and its a great case. give it a look. its also my most recent build.

DawnoftheDave's Completed Build: Shoebox Powerhouse!

DawnoftheDave submitter 3 Builds 1 point 23 months ago

I believe those are HDD and Power leds

Ayrus's Completed Build: The Fade to Black

DawnoftheDave 3 Builds 2 points 23 months ago

That itch is only going to get worse. I started off with a Nano S and I've just been building in smaller and smaller cases. Great Build! +1

davidavt's Completed Build: Tiny Entry Build

DawnoftheDave 3 Builds 2 points 23 months ago

Okay bud. Whatever you say.

davidavt's Completed Build: Tiny Entry Build

DawnoftheDave 3 Builds 2 points 23 months ago

no he won't... his 7700 can handle the load. I know this by experience. OP get a 144 hz monitor

davidavt's Completed Build: Tiny Entry Build

DawnoftheDave 3 Builds 2 points 23 months ago

This guy bluejeanbaby is either a Troll or has to do some research.

davidavt's Completed Build: Tiny Entry Build

DawnoftheDave 3 Builds 2 points 23 months ago

no. it doesn't. only the i7 has hyperthreading.

davidavt's Completed Build: Tiny Entry Build

DawnoftheDave 3 Builds 2 points 23 months ago

haha lies

davidavt's Completed Build: Tiny Entry Build

DawnoftheDave 3 Builds 1 point 23 months ago

Haha I know! but glad my monitor can overclock to 180hz

DawnoftheDave's Completed Build: Shoebox Powerhouse!

DawnoftheDave submitter 3 Builds 1 point 23 months ago

Thank you

DawnoftheDave's Completed Build: Shoebox Powerhouse!

DawnoftheDave submitter 3 Builds 1 point 23 months ago

They are the logitech z333. they also have a powered sub on the floor which isn't shown. I highly recommend. I love the look of them.

DawnoftheDave's Completed Build: Shoebox Powerhouse!

DawnoftheDave submitter 3 Builds 1 point 23 months ago

Thanks!

DawnoftheDave's Completed Build: Shoebox Powerhouse!

DawnoftheDave submitter 3 Builds 1 point 23 months ago

Thanks. bottom of the gpu is a great place for a lighting strip.

DawnoftheDave's Completed Build: Shoebox Powerhouse!

DawnoftheDave submitter 3 Builds 1 point 23 months ago

Yes it is. I've had it about a year. Physically it hasn't given me any issues but the bottom row of lighting just went out. It's ok.

DawnoftheDave's Completed Build: Shoebox Powerhouse!

DawnoftheDave submitter 3 Builds 1 point 23 months ago

Monitor is in description. Logitech mx performance mouse and some cheap mechanical keyboard from amazon. The bottom row of lights on the keyboard just died so I don't recommend.

DawnoftheDave's Completed Build: Shoebox Powerhouse!

DawnoftheDave submitter 3 Builds 1 point 23 months ago

Had it for a while. Skylake had just come out and the price on black Friday couldn't be beat.

ravenousjoe's Completed Build: The Most Basic ITX Build - School and Media PC

DawnoftheDave 3 Builds 2 points 23 months ago

+1 for G4560

davidavt's Completed Build: Tiny Entry Build

DawnoftheDave 3 Builds 2 points 23 months ago

because Hyperthreading

davidavt's Completed Build: Tiny Entry Build

DawnoftheDave 3 Builds 1 point 23 months ago

yea he needs 144hz or higher res.

davidavt's Completed Build: Tiny Entry Build

DawnoftheDave 3 Builds 1 point 23 months ago

Because you cant overclock with the c7 cooler and SFF case/ no case fans. Temps will be very high.

Quinterantino's Completed Build: Arctic Hot Box

DawnoftheDave 3 Builds 1 point 23 months ago

I am also currently building in this case a second time. I love this case.

I had 2 questions, How is the noise levels with the 3.5 HDD? High vibrations? How did you install the top 120mm fan over the PSU?

I would also like to inform you that there is a full dust filter kit on amazon. here's a link! https://www.amazon.com/dp/B01M5APAMM/ref=cm_sw_r_tw_dp_x_Z888ybV97TTE9

egordagr8's Completed Build: Shoestring Budget Build

DawnoftheDave 3 Builds 2 points 25 months ago

DO IT! dual core with hyper threading. seen a few reviews saying its the best bang for the buck.

egordagr8's Completed Build: Shoestring Budget Build

DawnoftheDave 3 Builds -1 points 25 months ago

only reason I would upgrade is because that stock cooler is loud. nothing beats the CM212 evo for the price.

DawnoftheDave's Completed Build: Low-Mid Range Nano Gaming Build

DawnoftheDave submitter 3 Builds 1 point 27 months ago

I don't mind. Good luck! link your build here when you're finished!

DawnoftheDave's Completed Build: Low-Mid Range Nano Gaming Build

DawnoftheDave submitter 3 Builds 1 point 28 months ago

around 50c while playing gta 5, 80% load

dStick's Completed Build: JET_BLACK_BEAUTY::hideCables('Node202', 'z170i', '6600K', 'GTX1070');

DawnoftheDave 3 Builds 1 point 29 months ago

shipping probably

LOD_DTOM's Completed Build: Long live the user!

DawnoftheDave 3 Builds 1 point 29 months ago

Thank you for listing everything!

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 30 months ago

I used a dremel with a cutoff wheel. the rubber edging is from bestbyte.net

LemurWithAFemur's Completed Build: Sold PS4 for this :^)

DawnoftheDave 3 Builds 6 points 30 months ago

better picture would be grand! Welcome to the PCMASTERRACE! btw that PSU will do just fine with a 1070.

DawnoftheDave's Completed Build: Low-Mid Range Nano Gaming Build

DawnoftheDave submitter 3 Builds 1 point 30 months ago

no its a Corsair PWM SP120. works great and its pretty quite

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 30 months ago

I overclocked my GPU but not my CPU. its not noisy at all.

DawnoftheDave's Completed Build: Low-Mid Range Nano Gaming Build

DawnoftheDave submitter 3 Builds 1 point 30 months ago

2 front fans are Thermaltake riing fans. rear is corsair sp 120 white led fan.

Led strip is a cheap kit from Frys with a remote.

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 30 months ago

yes the USB front port was removed. the thick cable was in the way of the GPU.

The temps of the GPU are great. 71c is overclocked at 100% load. I play a lot of Rocket League and it stay around 53c.

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 31 months ago

I will soon. since the case is full aluminum I cannot use magnetic dust filters so I will probably mount some directly to the fans. thanks for looking!

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 31 months ago

Thank you!

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 31 months ago

when I bought the 970, the new pascal cards were not available. I will probably upgrade to the 1070 on black Friday though.

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 31 months ago

That is the next thing on my to do list.

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 31 months ago

Thanks! yes it took me a while to plan everything out but it all fits nicely.

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 31 months ago

inverter for the RGB led kit. thanks for looking!

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 31 months ago

Thank You.

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 31 months ago

Thank you Josh!

DawnoftheDave's Completed Build: My Smallest Gaming Build!

DawnoftheDave submitter 3 Builds 1 point 31 months ago

Thanks! yes it barely does

DawnoftheDave's Completed Build: Low-Mid Range Nano Gaming Build

DawnoftheDave submitter 3 Builds 1 point 33 months ago

they are 12 inches long. I would say for this case it would be about 8 or 9 inches.

DawnoftheDave's Completed Build: Low-Mid Range Nano Gaming Build

DawnoftheDave submitter 3 Builds 1 point 34 months ago

Thanks! The 270x was a pretty underpowered card so it really didn't take much fan speed to cool it. Never really seen more than 60c. The 970 runs hot (79c) for me but It has nothing to do with the case. The reference blower style is great for this case because the Gpu heat doesn't affect my other components. Plus my bottom intake case fan is right in front of the Gpu which is great.

As for noise. The 970 is a bit louder but only because I have it running at 50% fan speed. But it's definitely not noticeable fan sound unless you're listening for it.

DawnoftheDave's Completed Build: Low-Mid Range Nano Gaming Build

DawnoftheDave submitter 3 Builds 1 point 34 months ago

I don't understand your question. I just upgraded to a reference GTX 970 and it stays about 74c at 50% fan speed. It's super quite. My PSU fan is the loudest thing in my system.

DawnoftheDave's Completed Build: Low-Mid Range Nano Gaming Build

DawnoftheDave submitter 3 Builds 1 point 34 months ago

No it doesn't have a fan Hub. My mobo comes with 3 fan headers.

DawnoftheDave's Completed Build: Low-Mid Range Nano Gaming Build

DawnoftheDave submitter 3 Builds 1 point 34 months ago

I love the case. No complaints. Cable management was very easy.

DawnoftheDave's Completed Build: Low-Mid Range Nano Gaming Build

DawnoftheDave submitter 3 Builds 1 point 34 months ago

I would suggest low profile ram but the fans are adjustable on the 212 evo so they might fit.

Page
1