PCPartPicker

  • Log In
  • Register

Comments

Gabiche's Completed Build: My wife reaction: "OMG, it was so quick"

ThugginMcMuffin 3 Builds 1 point 15 months ago

it's so nice to see xeon builds.

wilson945's Completed Build: HoneyBadger3 - Meshify C w/ Custom Loop

ThugginMcMuffin 3 Builds 1 point 16 months ago

How is that Pump/Res mounted? I can't really tell. It's something I don't think I've actually seen before. either way excellent build. very well done. you have some really clean tube runs.

rmowell's Completed Build: AMD Threadripper 1950X Build

ThugginMcMuffin 3 Builds 1 point 18 months ago

please stop, I can only get so errect. +1

builder_01's Completed Build: Hyper Build

ThugginMcMuffin 3 Builds 1 point 19 months ago

NZXT released a special line of S340 and H440 cases that were painted after a CS:GO skin, called the hyperbeast. It's a limited production, and only 1337 were made.

one_pump_trump's Completed Build: The beast.

ThugginMcMuffin 3 Builds 2 points 20 months ago

I like your username more than the actual build haha.

Mnpctech's Completed Build: Cooler Master Mastercase 5 Racing

ThugginMcMuffin 3 Builds 1 point 20 months ago

I can only get so erect. please. take my +1.

KRCaulfield's Completed Build: First PC Build

ThugginMcMuffin 3 Builds 2 points 20 months ago

So what has your gaming experience been like so far?

SANKTEG's Completed Build: 13 YEARS OLD WITH 1080

ThugginMcMuffin 3 Builds 2 points 20 months ago

not a fan of the whole bragging vibe you got going on, but congratulations on the upgrade. Also, being 13 doesn't matter, just focus on the achievement that you have done, which is build a very nice PC that'll last you for quite a few years down the road.

One8seven's Completed Build: SKYWALKER

ThugginMcMuffin 3 Builds 2 points 20 months ago

Excellent to know, thank you!

Eagle117's Completed Build: Ryzen upgrade turned into new build...

ThugginMcMuffin 3 Builds 1 point 20 months ago

Is that a HB SLI bridge? if not, should pick one up for sure.

One8seven's Completed Build: SKYWALKER

ThugginMcMuffin 3 Builds 1 point 20 months ago

how is the build quality on the barrow stuff? I am interested in them for the future, as I have heard they are pretty much unbranded bitspower fittings. Do you think they will hold up over time?

*EDIT spelling

accessory's Completed Build: Simple and quiet NCase M1 Ryzen build for content creation.

ThugginMcMuffin 3 Builds 2 points 21 months ago

As for the design mini, I would take one over the Ncase any day. The bitFenix Portal is a gimmick, and has quite a few issues that I won't go into. And the build quality IS superior. It's all metal, and made in the Lian Li Factory, and we all know how their build quality is. There are a lot of cases on the market that are much more expensive that people still buy. Take for example CaseLabs. I think they are a great line of cases, but I could never justify spending $500 on a case.

accessory's Completed Build: Simple and quiet NCase M1 Ryzen build for content creation.

ThugginMcMuffin 3 Builds 1 point 21 months ago

it's one of the smallest cases you can get on the market,has great acoustic levels,cooling, and It has fantastic build quality. they are great for watercooling as well.

ivannooz's Completed Build: Anubis Build Part 1 (Custom Loop Black and Gold Theme)

ThugginMcMuffin 3 Builds 2 points 21 months ago

can we get pictures of the full build from a side view and exterior case pictures?

zidovudin's Completed Build: Green wall-e

ThugginMcMuffin 3 Builds 1 point 23 months ago

Is the fan on the GPU able to be removed? I know it's a reference card, so I thought without the stock cooler and a waterblock on it, it would be a very short card, which would be great for ITX builds.

Pfffmayne's Completed Build: 1700x = Broke

ThugginMcMuffin 3 Builds 2 points 23 months ago

sorry, its a really bad joke lol. https://www.youtube.com/watch?v=4xgx4k83zzc

confuzledandlost's Completed Build: White/RGB SLI GTX 960 Gaming Build

ThugginMcMuffin 3 Builds 2 points 23 months ago

go with a cablemod extention set. I have them in my build, and have had them for awhile and they are still as clean as I got them. very easy to train them into where you want them to go.

Pfffmayne's Completed Build: 1700x = Broke

ThugginMcMuffin 3 Builds 2 points 23 months ago

does that speaker setup go up to 11? nice build man!

Zeke181's Completed Build: Pretty darn good medium budget gaming build!

ThugginMcMuffin 3 Builds 1 point 24 months ago

did not notice I typed it wrong my bad :P

Zeke181's Completed Build: Pretty darn good medium budget gaming build!

ThugginMcMuffin 3 Builds 1 point 24 months ago

the FX line has never been all that good, and before you flame me I have a fx 6300 OC to 4.5Ghz. it's just a simple fact that it's 6 year old architecture, and was focused more on the core count than ICP.

click2vasu's Completed Build: For 3d And Video Editting

ThugginMcMuffin 3 Builds 2 points 24 months ago

it's...a crime against humanity. it needs to be burned. which the molex will solve that for him.

click2vasu's Completed Build: For 3d And Video Editting

ThugginMcMuffin 3 Builds 2 points 24 months ago

is...is that molex going to the 6 pin on the GPU????

hcts's Completed Build: DAN A4-SFX AIO Build v 0.2

ThugginMcMuffin 3 Builds 1 point 24 months ago

I love small builds like this.

tehchicken's Completed Build: Budget Red (Upgraded Build)

ThugginMcMuffin 3 Builds 1 point 24 months ago

so two EVGA badges, one nzxt, and a deepcool case. I think it is having an identity crisis right now :P

Logical_Motion's Completed Build: Sleepless Knight (Hot Mess) budget build

ThugginMcMuffin 3 Builds 1 point 24 months ago

Sarcasm :P

ThugginMcMuffin's Completed Build: Puff The Magic Dragon 2: Puff Harder

ThugginMcMuffin submitter 3 Builds 1 point 25 months ago

it was very cool to make it with my friend, and as an added bonus, it helped steer the theme of my build with the blue/white/back.

Dotica's Completed Build: Lightning

ThugginMcMuffin 3 Builds 1 point 25 months ago

already have some nice cables from cablemod, but thanks for the info :)

Dotica's Completed Build: Lightning

ThugginMcMuffin 3 Builds 2 points 25 months ago

did you end up getting your cables from ensourced? he makes great cables.

maclamby's Completed Build: $1500 Enthusiast Gaming Build - Featured Guide

ThugginMcMuffin 3 Builds 1 point 26 months ago

it's a shame that EK only made 50 of the Vulture cases. I would rather get the original than a knock off case like this. it promotes bad behavior. Thermaltake seemingly knocks off a lot of case designs, like caselabs,Corsair, and others. kind of embarrassing for a company, not being able to come up with anything original.

Never the less, great build.

Lyoko649's Completed Build: Project CCandy - TPmods

ThugginMcMuffin 3 Builds 2 points 26 months ago

That bend going to the pump to the GPU is bugging me.... A LOT

spawn01's Completed Build: New gaming rig

ThugginMcMuffin 3 Builds 0 points 27 months ago

2nd sentence in the description bro. besides, the 980ti performs very similar to a 1070. Only reason I would choose one over the other is the 1070 requires less power, and outputs less heat. still $100 more for a 1070 than a 980ti though.

StevenOfx's Completed Build: Its my pc

ThugginMcMuffin 3 Builds 1 point 27 months ago

1440p on a 280x? I think somebody is lying :P. or are you turning down the settings at 1440p?

ThugginMcMuffin's Completed Build: Puff The Magic Dragon 2: Puff Harder

ThugginMcMuffin submitter 3 Builds 1 point 27 months ago

All I had to do was boost the voltage to 1.304 and change the multiplier to (I think) 23.5 or something similar. if you want, you could use the OC genie in the BIOS. It got a overclock pretty close to my manual one, so give that a shot.

ThugginMcMuffin's Completed Build: Puff The Magic Dragon 2: Puff Harder

ThugginMcMuffin submitter 3 Builds 1 point 27 months ago

Im not sure what you are trying to ask by what my settings were. are you asking about the overclock?

jipster69's Completed Build: ________.-~=•[ ENZO THE DRAGON ]•=~-.________ .-•=[The Long Lost Winning MSI Dream Build]=•-.

ThugginMcMuffin 3 Builds 3 points 27 months ago

congrats on the build and the feature jipster, you truly are a vital member to the PCPP community. Easiest +1 I have ever given.

gavjof's Completed Build: Red Phantom

ThugginMcMuffin 3 Builds 2 points 27 months ago

Read the 4th paragraph.

ThugginMcMuffin's Completed Build: Puff The Magic Dragon 2: Puff Harder

ThugginMcMuffin submitter 3 Builds 1 point 27 months ago

thanks :)

Kruhaug's Completed Build: Gray/Black Phanteks Enthoo Evolv with RGB build

ThugginMcMuffin 3 Builds 1 point 27 months ago

the graphics card is perfect for this build my man, it matches so well with the overall theme, and that motherboard. easy +1 for sure!

EDIT: what is that on the PSU shroud? just a mirror? it works really well, and its pretty hard to spot at first, it blends in so nicely.

Drachenherz's Completed Build: Drachenherz VR

ThugginMcMuffin 3 Builds 1 point 27 months ago

wow I don't think I have ever seen that CPU cooler before, +1 on originality, and pretty good overall part choices.

SarcastaBomb's Completed Build: First Build (Spring/Summer 2015)

ThugginMcMuffin 3 Builds 1 point 27 months ago

I had the same processor and GPU for one of my very first builds, good choice! I can't wait till zen comes out, mostly to see price/performance to see if its worth it, or to go skylake.

jetblade8's Completed Build: Aether - Blue and white mid range gaming PC - Best under $1,000 AUS ($750US) build

ThugginMcMuffin 3 Builds 1 point 27 months ago

The NZXT s340 has to be one of the top budget cases out there that makes builds look great effortlessly.

'course, I could be a little biased :)

pinoy44's Completed Build: Purple Haze / RGB

ThugginMcMuffin 3 Builds 2 points 27 months ago

very nice, some more cable management could go a long way towards looks, and some sleeved cables would help give it some pop!

AION-MC's Completed Build: Project: Azure

ThugginMcMuffin 3 Builds 1 point 27 months ago

Do I even bother looking at the build before I +1? Always wonderful builds from you!

EDIT: you guys sure love InWin Cases :P

crookz_n_castlez's Completed Build: The Barbershop

ThugginMcMuffin 3 Builds 3 points 27 months ago

yeeeessssss feed my liquid cooling addiction. so many beautiful loops being posted today, I have truly been blessed. +1 easy.

joshking403's Completed Build: PROJECT FLAT REZ

ThugginMcMuffin 3 Builds 1 point 27 months ago

He has posted this exact version twice so far. literally there were no changes, it had the flat res' already.

joshking403's Completed Build: PROJECT FLAT REZ

ThugginMcMuffin 3 Builds 4 points 27 months ago

I'm getting tired of seeing this build reposted all the time dude. I have seen it at least 5 times or something.

szeater's Completed Build: Evolv ATX TG Custom Loop - Black & Orange

ThugginMcMuffin 3 Builds 2 points 27 months ago

hope you reversed that back fan so it exhausts.

disbedan015's Completed Build: Personal gaming rig

ThugginMcMuffin 3 Builds 2 points 27 months ago

you got a damn good overclock on that CPU for being on air my brother.

evensteven02's Completed Build: Mean little Amd machine

ThugginMcMuffin 3 Builds 1 point 27 months ago

He worded it poorly, but he spent $676 on the PC, including windows 10. He spent more on peripherals which made the price $882

Justiceinacan's Completed Build: HypeBox

ThugginMcMuffin 3 Builds 1 point 28 months ago

I got no love for my fx-6300 :( for some reason people thought I was going to bottleneck my rx 470 with it haha.

Page
1
·
·