add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube

Comments

Comments

Comment reply on Andree_Z18's Completed Build: Jack's got his Christmas

  • 11 months ago
  • 1 point

Some quality cable management! Is that a HDMI cable inside the back?

Comment reply on ben94522's Completed Build: Minify

  • 13 months ago
  • 1 point

The cooler and the fans are great. My current fan setup runs at 900 rpm constant. 5 ghz with 1.345~vcore. Liquid temperature goes from 27 to 47 depending on ambient(which is about 25ish) So far below permiation point. Pumpspeeds don't matter at all it seems to me. And the original fans never really need to run over 40%. Installation is also pretty straight forward. Top exhaust fans will be in the way of the tubes depending on how you mount the rad. Stock thermal paste also performed pretty good.

Comment reply on Erickr19's Completed Build: The Evolv X

  • 13 months ago
  • 2 points

Superb build. You might want to change your ram layout though to take advantage of dual channel. Should bring you some more performance

Comment reply on ben94522's Completed Build: Minify

  • 13 months ago
  • 1 point

Thank you! So far everything is running great. I have no comparison board but 5ghz was no problem. 5.1 just gets too hot on the chip. The VRM on one of the asus matx would probably be better but for an i5 this is fine. Keep in mind that the RGB controller is limited to 7 colours and nearly no effects. No rainbow if you're into that.

Comment reply on Krade1367's Completed Build: Red Silk

  • 14 months ago
  • 1 point

Nice build. might want to turn the power supply around though.

Comment reply on ben94522's Completed Build: Minify

  • 15 months ago
  • 1 point

White is hard to match on rgb components. I tried and just had every component in a different shade

Comment reply on ben94522's Completed Build: Minify

  • 15 months ago
  • 1 point

I personally like the dark tint more. But it depends. Maybe you want to see everything if you have a very nice motherboard and cable management. It depends on how you highlight stuff. I had a small form factor gpu that i didnt want to swap. Its not that visible with the tint but looks stupid in a clear case.

Its all pretty much the same. The front lit up with 3 fans is quite satisfactory with its mesh. The LL fans will give that pattern even more character

Comment reply on ben94522's Completed Build: Minify

  • 15 months ago
  • 1 point

Hello. I was about to get the LL series fans but didnt feel like paying for 6 of them so i went with enermax fans. As you said, the glass is very dimm and doesnt show much else than the LEDs themselfs. I dont really know a lot about the LL fans alot but they should spill more light in your case than the enermax fans will. I for example also took one rgb strip in the front and top to give all components some light since its just so dark

Comment reply on Roxasheart77's Completed Build: First Pc Build

  • 15 months ago
  • 1 point

Hi i have the same fans and couldnt help but notice you installed them as exhaust fans in the front. Just for looks or are you running the fans on opposite? If you didnt notice that might help with cooling. If all your fans are on exhaust youll probably have a very dusty system after a while since it will pull air from anywhere. mostly the back. Also of course the cooling will almost always work better with positive airpressure

Comment reply on PCPartPicker Blog Post "Meshify C Mini / X399 mATX Build"

  • 16 months ago
  • 1 point

Hey, nice build. have you tested top vs front mounted radiators with this case?

Comment reply on UTxMzDiamond's Completed Build: Watermelon Beast

  • 16 months ago
  • 1 point

Hey, how did you make two colour zones for the fans? got two controllers?

Edit: looking at your purchase list explains. no need to answer.

Comment reply on ben94522's Completed Build: Minify

  • 16 months ago
  • 1 point

Mobo softwares mainly. Nothing for me because the aio and the fans have own controllers. And since the ram is very bright i turn it down slightly to adjust to the aio.

Comment reply on ben94522's Completed Build: Minify

  • 17 months ago
  • 1 point

Ive had a look and on first glance it doesnt really look like theres anything in the way of a 360. since its not alot wider than the fans. Looking at the manual though it looks pretty tight. Maybe its just that top part with the fittings that wont fit. Aslong as your not going I9, youll be good with a 280. And if you are, you may aswell go custom loop with dual 280s

Comment reply on ben94522's Completed Build: Frankensteins CSGO Backup

  • 17 months ago
  • 1 point

YES! Maybe a server power supply thats long and fits:D But i actually still use the hardware so ill stick with it. Yeah this has more upvotes than my "expensive" build. I guess its the more custom aspect with the cardboard boxes.

Comment reply on IanMSmith's Completed Build: BLU

  • 17 months ago
  • 2 points

Good ol dremel. Love it!

Comment reply on ben94522's Completed Build: Frankensteins CSGO Backup

  • 17 months ago
  • 1 point

Tell me if you find any silver sfx power supplies:D The mainboard stays where it is only because of the tension between cpu cooler and psu being crammed and taped in place :D

Comment reply on ben94522's Completed Build: Frankensteins CSGO Backup

  • 17 months ago
  • 1 point

Probably a good idea :D

Comment reply on ben94522's Completed Build: Frankensteins CSGO Backup

  • 17 months ago
  • 1 point

The case case was trash anyway (literally cut the top open for a 240 rad) and i was bored and kinda could use a second system taking away load while i game. And if i take the thing somewhere its gun be guud.

Comment reply on ben94522's Completed Build: Frankensteins CSGO Backup

  • 17 months ago
  • 1 point

Did you expext one after seeing the first picture?

Comment reply on ben94522's Completed Build: Minify

  • 17 months ago
  • 1 point

For now, will post more with more mods. corsair LL coming

Comment reply on ben94522's Completed Build: Minify

  • 17 months ago
  • 1 point

Hi, I had an Asrock M8 series case before that was ITX. Same goes with the mini 1080. And since the power supply is no louder than a lower power ATX one i have i just used that one with its bracket. its as quiet as the case fans on low speed

Comment reply on ben94522's Completed Build: Minify

  • 17 months ago
  • 1 point

Thanks! I didn`t know that

Sort

add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube