PCPartPicker

  • Log In
  • Register

Comments

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 4 months ago

Sorry bud, I don’t have Facebook. For this issue, I think you should update your drivers.

Only have 1 lighting software at the same time, configure to whatever you like for one brand devices, then close/EXIT that. Open the other one.

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 4 months ago

No

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 6 months ago

Thanks

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 1 point 8 months ago

Yah, are you interested?

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 2 points 8 months ago

<33333333333333333333333333333333333

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 2 points 8 months ago

I COULD, but there will be a noticeable gap at the bottom. Plus, I kinda like the looks of it with no glass.

(Also, I remove the front panel connector so the only way to boot my pc is to press the start button on the mobo)

I know I can start it with by using a screw driver touching the pins, but it's easier the other way :)

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 1 point 8 months ago

Thanks man!

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 2 points 8 months ago

Why would you get a 1080ti now? Also, why H mobo pair with the 8700k? No storage? What kind of psu is that? (Upgrade to a EVGA G2 or Corsair H or A series)

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 1 point 8 months ago

Thankyou :)

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 2 points 8 months ago

Best advice for you is to do A LOT OF RESEARCH.

And note that there aren't just one go-to company for each components.

Don't spend money on unnecessary things.

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 8 months ago

Different mobo lol...

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 2 points 8 months ago

I use node pro and yes, it can control all 6.

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 8 months ago

I use PETG, not glass tube. And Yes I think you could get away with using the vrm block if you mount JUST the fans at top.

PETG, I just use a tool like this : https://gyazo.com/76ce751abad864ed8eb4f0df4ac497b1

For fittings, I recommend you to go with barrow fittings since they are the most cheap (On Aliexpress) Same quality as bitspower but without the popping logo

Guide : https://www.youtube.com/watch?v=os1j4i8HNDU

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 8 months ago

Its a flow indicator, but I usually take off the wire for it just for the cleaner look.

Basically my idea was me seeing the "Ferris wheel" spinning when water pass through.

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 1 point 8 months ago

Thank you so much for the compliment!

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 2 points 8 months ago

Thank you the compliment!

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 2 points 8 months ago

They are not UV reactive cable combs lol

Also, you need to make your own cables for the one I'm using. Or de-pin all the connectors and insert them through the wraps.

https://www.ensourced.net/wire-wraps/

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 2 points 8 months ago

The build already got some custom cables with precise length I measure out so adding more cable combs would just look like a mess imo. And yes, my coolant is reactive. The 24-Pin cable comb have a "Gloss White" coating on it.

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 1 point 8 months ago

Thankyou!

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 1 point 8 months ago

Oh, I saw a build that got featured after my post so I wasn't expecting this haha.

Thank you btw!!! :)

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 1 point 8 months ago

Oh also PETG usually come with so many scratches for me beside EK (but they’re EXTREMELY EXPENSIVE)

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 2 points 8 months ago

I can cut it with a dremel and it comes with ALMOST zero scratches. (You only see it if you REALLY REALLY pay attention to it) I’m sure you can cut PETG with a dremel too

It also bend easier for me, I can adjust the bends if i mess up. Its just something I personally feel is better.

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 1 point 8 months ago

Yup, I find it better that way lol

For the 1080ti blocks that WILL fit with the panels close are the zotac and founders edition. Hope this helps!

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 1 point 8 months ago

:)

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 2 points 8 months ago

Thx :)

iOhy's Completed Build: Violet Mirør

iOhy submitter 3 Builds 1 point 8 months ago

Thankyou for the kind words !!!!!

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 10 months ago

yup

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 10 months ago

Niceee dude. If you ever need help or anything, feel free to contact me

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 10 months ago

Hmmm.... I'd say $700-$1200

Depends on how crazy you want to go. I have another build coming up that I'm really excited for.

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 10 months ago

Thank you for the kind words!

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Thankyou for the kind words!

There was no clearance for it. The top radiator+fan configuration didn’t allow me to put a fitting there.

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Thanks for the kind words.

What do you mean “exterior” ? I thought i posted a lot already.

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Thanks for the compliment :)

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

I'm young and wanting to grow a channel where its mainly me building computers for myself/clients. Just to entertain, inspiring and showing people that a PC is not just a black box like one would see in Bestbuy/Target.

To shorten it out, PC aesthetic is art to me :)

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Thanks for the compliment :)

Look up “World Map Large Gaming Mouse Pad Mousepad” on Aliexpress

OR

Go on ebay, search worldmap mousepad

Mine is 90cm x 40cm

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Thanks for the compliment :)

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Thanks :D

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Thanks lol

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 2 points 11 months ago

I'm from Vietnam, thanks for the kind words too!

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

THANKSSSSS

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Thanksssss

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Sorry about that, I just posted a picture with your desire.

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 4 points 11 months ago

LOL

The picture was taken when the 1080ti were at crazy price.

Thank you !

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 2 points 11 months ago

It still won’t fit, trust me

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 2 points 11 months ago

Oh I forgot to mention that. There was no clearance for it. The top radiator+fan configuration didn’t allow me to put a fitting there.

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Yeah, I wanted to do a horizontal mount and that is the only place where the pumpres can fit.

If I mount if to the front radiator, the GPU will interfere with the pumpres.

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Thanks! The case is a breeze to work with

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Thankyouuuuu

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 1 point 11 months ago

Hell yeah :D

iOhy's Completed Build: Mirør 2.0

iOhy submitter 3 Builds 2 points 11 months ago

Because the bundle was $120. It was such a good deal

Thankyou for kind words. It really makes me happy when people are inspired by my build :D

Page
1
·