7 months, folks.
That's how long it took.
Honestly, the only glaring thing jumping out at me that I would change is your SSD. I gather you're going to be using that PNY CS900 for Windows. I wouldn't recommend that drive as an OS drive. It lacks DRAM and has a pretty weak controller.
For around $20, you can usually get a Team Group L5 Lite 3D 120 GB, which is a solid budget SSD and is appropriate as a lower cost OS drive. If you can stretch a little bit, I personally prefer the Adata SU800 (NOT the SU650/655 as those are also DRAM-less) for value to performance as a budget OS drive.
Less important than that, IMO, is the PSU. That 600B will certainly get the job done, but if you have that kind of a PSU budget, you could wait for a sale on a semi or fully modular power supply (or even check out EVGA's midweek madness sales - I've had a lot of great luck with those units) and REALLY improve your quality of life from a build standpoint.
Otherwise, it looks clean. You'll get a lot of mileage out of that rig, for sure.
Obviously, it'll depend on the other components and the resolution/settings you're going for... but yeah, it won't likely disappoint.
At 1080P gaming, the CPU is kind of your limiting factor there... and Ryzen pairs well with the Polaris GPU's.
Honestly, if I was gonna do anything different... I would have gone for a mobo with better VRM's and let go of wanting WiFi (which I don't use ever). I DID end up wanting to OC more than the Aorus B450 Pro Wifi could really handle and that's been the only thing really holding back my CPU frequencies. But the CPU and GPU were a fine couple while that was my set up. (I've since swapped for a GTX 1070 I got for almost free, tho soooooo... :-P)
Hecc yeah! They play very well with e/o, those two.
Not that I discovered in my initial testing, which was exclusively at 1080P medium/high settings most titles. It's a flexible set-up as long as you optimize your graphics settings... and it gives plenty of room to grow on the AM4 socket.
The rig is with the client now - last I checked in, they had no issues.
How much clearance do you have with that Noctua heatsink? Would the stock Wraith cooler fit in there?
How are those GPU temps?
CLEAN build. What case fans are those?
If I could give you two up-votes, I would. Wonderful story, solid build.
As others have pointed out and I know you're eyeing, get an SSD boot disk ASAP. Highly recommend throwing $20-25 at a Team Group 120-ish GB SSD when you have the chance. They have DRAM and are often some of the cheapest SSD's you can buy - perfect budget OS disk. Make sure to get the L5 3D version as the LITE version is DRAM-less.
They're not even close to the same price?
Your pain, our entertainment... great write-up and gorgeous photos. I'm a big fan of that green!
It took em 2 versions, too.
Oh, I forgot to include this in the parts, but the front intake is an Apevia CF12S-BK 120mm that I picked up for $6.
I love that heatsink so much. It's gorgeous.
As far as assembly goes, it's nothing special. You add on the AM4 brackets to the tower, itself.... and then you swap out the stock mobo backplate with Cooler Master's. The included backplate covers both Intel and AMD sockets, so you do need to install the mounting screws in the AM4 configuration... but it's labeled on the backplate and in the instructions. (Plus, there are a number of YouTube videos out there). I wouldn't say it adds any more time than prepping any after market cooler to install, really.
Gorgeous photos - what did you use to take em?
Part reviews posted!
I'm just waiting on that sweet sweet $100/TB price point to happen for NVMe. That will complete smol boi!
All credit to Keir_C_Yurkiw here, y'all. I was convinced I had those front Corsairs in intake and I was wrong. I just got home and checked... Yep. Exhaust.
Thanks for calling that out and making me triple check my work. Sorry for snapping back so knee jerk at ya.
I don't? They're in intake config.
Did you mean to reply to my comment for this?
Absolutely stunning build. Well done - and still a very reasonable budget achieved for that gorgeous aesthetic.
As an FYI, that CPU bench was immediately after running all three 3DMark benches.
And benchmarks posted! I am not surprised by these numbers and am quite pleased with the results.
The GPU was absolutely the limiting factor in the higher end bench tests... which is to be expected. So! Plenty of room to grow with just a GPU swap in the future. I'll probably hold onto the RX 590 for at least a couple of years, tho. I don't NEED to step up past solid mid tier 1080P just yet and I don't have the monitor for it, anyway!
That's with current retail pricing selected.
Yeah, I love having the option, even on a desktop. I still USE the Ethernet for my personal rig... but I'm a big fan of choices.
Brilliant! Love it
How about these big boi 590's amirite?
I really need to up my cell phone pic game!
+1 Budget Building!
Are we 100% on that being an MSI mobo? cuuuzzzz... (notices AORUS in the build pics)
+1 Maximum wind tunnel
That rig is glorious to behold.
What camera did you use for these pics?
How's that NVMe treating you?
My goodness, that is a pretty case!
Updated the CPU blurb with a super fun story!
Right? It's definitely a nice touch. And even at the MSRP (~$80), I would probably pull the trigger on this case. At less than $60 after MIR (fingers crossed!!), it was a no brainer and I am happy as can be with it.
Also, your published build is at least 30% responsible for this build's name... :-P
Shout out to https://www.reddit.com/r/buildapcsales/ for real
Thanks so much!
Yeah, I obsess over the QVL for Ryzen builds... it pays dividends with those CPU's. They are AMAZING at their price point, but they are picky as all get out.
It doesn't look like that RAM is on the QVL... that could be the problem?